/*]]>*/

W3C

Service Modeling Language Interchange Format Version 1.1

W3C Candidate Proposed Recommendation 25 November 2008 12 February 2009

This version:
http://www.w3.org/TR/2008/CR-sml-if-20081125/ http://www.w3.org/TR/2009/PR-sml-if-20090212/
Latest version:
http://www.w3.org/TR/sml-if/
Previous version:
http://www.w3.org/TR/2008/WD-sml-if-20080912/ http://www.w3.org/TR/2008/CR-sml-if-20081125/
Editors:
Bhalchandra Pandit, Microsoft Corporation
Valentina Popescu, IBM Corporation
Virginia Smith, HP

This document is also available in these non-normative formats: XML .


Abstract

This specification defines the interchange format for Service Modeling Language, Version 1.1 (SML) models. This format identifies the model being interchanged, distinguishes between model definition documents and model instance documents, and defines the binding of rule documents with other documents in the interchange model.

Status of this Document

This section describes the status of this document at the time of its publication. Other documents may supersede this document. A list of current W3C publications and the latest revision of this technical report can be found in the W3C technical reports index at http://www.w3.org/TR/.

This is the 12 February 2009 W3C Proposed Recommendation of "Service Modeling Language Interchange Format Version 1.1". W3C publishes a Candidate technical report as a Proposed Recommendation to indicate that the document is believed to be stable and to encourage implementation by the developer community. The Service Modeling Language (SML) Working Group expects to request a mature technical report that the Director advance this document to Proposed Recommendation once the Working Group has demonstrated two implementations of each required feature received wide review for technical soundness and implementability and at least one implementation of each optional feature affecting interoperability. The SML Working Group, working closely with the developer community, expects to show implementations by December 2008. This estimate is based on known implementations. The Working Group does not plan to request to advance to final endorsement from the W3C Advisory Committee. Proposed Recommendation prior to 01 January 2009. No features have been identified as "features at risk" by status is described in section 7.1.1 of the SML Working Group. Process Document .

The major substantive change since the previous publication of this specification as a Last Call Working Draft has been the introduction of what W3C Membership and other interested parties are expected invited to be the final namespace names for review the SML document and SML-IF namespaces; previously each new send comments through 12 March 2009. Please submit comments using the procedure described on the Working Draft used a new pair of namespace names. Other editorial and cosmetic changes Group’s home page .In summary, the Working Group solicits comments in Bugzilla from those who have also been made. access, and on the Working Group’s public mailing list ( public archive ) from others. Advisory Committee Representatives should consult their WBS questionnaires .

This document has been developed by the Service Modeling Language (SML) Working Group , which is a part of the Extensible Markup Language (XML) Activity . The Service Modeling Language Working Group believes that this specification addresses its requirements and all Last Call and Candidate Recommendation issues. Known implementations are documented in the implementation reports ( Features Implemented and Implementation Test Results ). Since the Candidate Recommendation in November 2008, a number of small clarifications have been added to the text of the specification in order to address feedback from implementation experience. A complete list of changes to this document is available. None of the changes affect the conformance criteria.

Publication as a Candidate Proposed Recommendation does not imply endorsement by the W3C Membership. This is a draft document and may be updated, replaced or obsoleted by other documents at any time. It is inappropriate to cite this document as other than work in progress.

Please submit comments on this document using the procedure described on the Working Group’s home page . In summary, the Working Group solicits comments in Bugzilla from those who have access, and on the Working Group’s public mailing list ( public archive ) from others. This document was produced by a group operating under the 5 February 2004 W3C Patent Policy . W3C maintains a public list of any patent disclosures made in connection with the deliverables of the group; that page also includes instructions for disclosing a patent. An individual who has actual knowledge of a patent which the individual believes contains Essential Claim(s) must disclose the information in accordance with section 6 of the W3C Patent Policy .

Table of Contents

1. Introduction (Non-Normative)
2. Notations and Terminology
    2.1 Notational Conventions
    2.2 Terminology
3. Dependencies on Other Specifications
4. Informal Description (Non-Normative)
    4.1 Packaging
    4.2 URI References
    4.3 Rule Bindings
    4.4 Schema Bindings
    4.5 Interoperability of SML Models
5. SML Interchange Format Definition
    5.1 Conformance Criteria
    5.2 SML-IF Documents
        5.2.1 Embedded Documents
        5.2.2 Referenced Documents
        5.2.3 Schema Completeness
        5.2.4 SML-IF Document Version
    5.3 URI References
        5.3.1 URI equality
        5.3.2 Base URIs
            5.3.2.1 smlif:baseURI
        5.3.3 Document Aliases
        5.3.4 URI Reference Processing
    5.4 Document Bindings
        5.4.1 URI Prefix Matching
        5.4.2 Rule Bindings
        5.4.3 Schema Bindings
6. References
    6.1 Normative
    6.2 Non-Normative

Appendices

A. SML-IF Schema
B. Localization of IF Identity Sample (Non-Normative)
C. Acknowledgements (Non-Normative)


1. Introduction (Non-Normative)

As defined in the Service Modeling Language, Version 1.1 (SML) Specification [ SML 1.1 ] an SML model is a collection of XML documents that may be used to describe complex services and systems such as a set of IT resources, services and their interrelations.

In every SML model there are two distinguished subsets of the model's documents, the definition documents and the instance documents. The model's definition documents describe the abstract structure of the model, and provide much of the information a model validator needs to decide whether the model, as a whole, is valid. The model's instance documents describe or support the description of the individual resources that the model portrays.

The SML Specification identifies two categories of model definition documents that participate in SML model validation: Schema documents and rule documents. Schema documents in a model are XML documents that conform to the [ SML 1.1 ] defined extensions to XML Schema [ XML Schema Structures , XML Schema Datatypes ]. Rule documents in a model include XML documents that conform to the [ SML 1.1 ] defined extensions of Schematron [ ISO/IEC 19757-3 ].

To ensure accurate and convenient interchange of the documents that make up an SML model, it is useful to define both an implementation-neutral interchange format that preserves the content and interrelationships among the documents and a constrained form of SML model validation. For this purpose, this specification defines a standard format called the SML Interchange Format (SML-IF) and a process called interchange model validation.

The specification consists of two parts. The first part is an informal description of SML-IF to set the context. This is followed by SML-IF's normative definition.

2. Notations and Terminology

2.1 Notational Conventions

The keywords " MUST ", " MUST NOT ", " REQUIRED ", " SHALL ", " SHALL NOT ", " SHOULD ", " SHOULD NOT ", " RECOMMENDED ", " MAY ", and " OPTIONAL " in this document are to be interpreted as described in RFC 2119 [ IETF RFC 2119 ].

This specification follows the same conventions for schema components as those used in the XML schema specification [ XML Schema Structures ]. That is, references to properties of schema components are links to the relevant definition, set off with curly braces, for instance {example property}. References to properties of information items as defined in [ XML Information Set ] are notated as links to the relevant section thereof, set off with square brackets, for example [children].

The content of this specification is normative except for sections or texts that are explicitly marked as non-normative. If a section is marked as non-normative, then all contained sub-sections are non-normative, even if they are not explicitly marked as such. All notes are non-normative unless otherwise specified.

2.2 Terminology

The following terms are used in this specification. They are listed here in alphabetical order. This specification also uses terms defined in the [ SML 1.1 ] specification.

Alias

An alias is a temporary name assigned to a model document [ SML 1.1 ] within the context of an interchange model .

Implementation-Defined

An implementation-defined feature or behavior may vary among processors conforming to this specification; the precise behavior is not specified by this specification but MUST be specified by the implementor for each particular conforming implementation.

Implementation-Dependent

An implementation-dependent feature or behavior may vary among processors conforming to this specification; the precise behavior is not specified by this or any other W3C specification and is not required to be specified by the implementor for any particular implementation.

Interchange Model

An interchange model is an SML model [ SML 1.1 ] being interchanged.

Interchange Model Validation

Interchange model validation is the process of performing SML model validation [ SML 1.1 ] on the interchange model while maintaining all assertions and interrelationships among the documents in the interchange model as defined by this specification.

Schema Binding

A schema binding is an association of a namespace with a set of schema documents in the interchange model and the instance documents [ SML 1.1 ] that should be validated against this set of schema documents.

SML-IF Consumer

An SML-IF consumer is a program that processes an SML-IF Document using, in whole or part, semantics defined by this specification. It may or may not perform interchange model validation .

SML-IF Document

An SML-IF document is an XML representation of an interchange model . It includes the model's identity, its documents (by value or by reference), metadata about its documents, and a syntactic representation of concepts defined as part of an SML model but lacking an SML-defined sytnax (e.g. rule bindings).

SML-IF Producer

An SML-IF producer is a program able to generate an SML-IF Document from an SML model.

3. Dependencies on Other Specifications

Other specifications on which this one depends are listed in [ Normative_References ].

Conforming implementations of this specification MUST support SML 1.1 [ SML 1.1 ], XML 1.0 [ XML ] and XML Schema 1.0 [ XML Schema Structures , XML Schema Datatypes ]. Conforming implementations MAY additionally support later versions of the XML or XML Schema specifications.

Note:

Although SML 1.1 and SML-IF allow conforming implementations to support newer versions of dependent specifications, there are interoperability implications to be considered when documents based on those versions are interchanged using SML-IF. When an SML-IF document interchanges data built using newer versions of the SML and SML-IF dependent specifications, consumers of the SML-IF document not supporting these versions may be unable to interpret some of the data exchanged by this document.

4. Informal Description (Non-Normative)

To represent an SML model in a standard way for interchange, the following topics need to be addressed.

Packaging: The collection of XML documents that make up a model to be interchanged need to be gathered together. In doing so, the model definition and model instance documents need to be distinguished from one another since they play distinct roles in the model.

Explicit references: The documents to be interchanged may explicitly refer to one another and to documents that are not packaged with the documents being interchanged. [ SML 1.1 ] SML references among SML model instance documents are an obvious example. Less obvious are such references as certain schemaLocation attributes in schema documents and xsi:schemaLocation attributes in instance documents. Section 4.4 Schema Bindings defines how schemaLocation is processed in these cases.

Rule bindings and schema bindings: [ SML 1.1 ] permits models in which rule documents apply to all, none, or subsets of the model's documents. SML-IF specifies how to describe which rule documents apply to which of the model's documents.

Model validation: The process of SML model validation defined in [ SML 1.1 ] contains points of variability that, left unconstrained, would make it difficult for SML-IF to ensure interoperability of independent implementations in any practical way. Many of these sources of variability are inherited from other specifications that SML uses, e.g. URI comparison RFC 3986 ([ IETF RFC 3986 ]) and the source of Schema components ([ XML Schema Structures ]) used to validate model instance documents. SML-IF constrains these points of variability, with the goal of ensuring interoperability when specific conditions are met and of increasing the likelihood of interoperability in other cases. The enforcement of these additional constraints on SML model validation occurs during the process of interchange model validation .

4.1 Packaging

An SML-IF document packages a collection of SML model documents to be interchanged as a single XML document. All SML-IF documents conform to the XML Schema defined in the normative part of this specification.

Informally, the structure of SML-IF documents, using the pseudo-schema notation from WSDL 2.0 [ WSDL 2.0 Core Language ] is as follows:

<?xml version="1.0" encoding="UTF-8"?>
<model xmlns="http://www.w3.org/ns/sml-if"
       xmlns:xs="http://www.w3.org/2001/XMLSchema"
       SMLIFVersion="xs:token Version number of the SML-IF spec used to generate the current document">
       schemaComplete="xs:boolean"

       SMLIFVersion="xs:token Version number of the SML-IF spec used to generate the current document"
       schemaComplete="xs:boolean">

    <identity>
        <name>
            xs:anyURI Namespace identifying the model
        </name>
        <version> ?
            xs:token <!-- The version of this model. E.g., 1.2 or 0.3 -->
        </version>
        <displayName sml:locid="xs:anyURI URI identifying the translation
                                resource for the display name" ?> ?
            xs:string Descriptive name of model intended for display
        </displayName>
        <baseURI>
            xs:anyURI <!-- Base URI for relative references defined in the interchange model; 
                           must be an absolute reference -->
        </baseURI> ?
        <description sml:locid="xs:anyURI URI identifying the translation
                                resource for the description" ?> ?
            xs:string Textual description of model for human consumption
        </description>
    </identity>
    <ruleBindings> ?
        <ruleBinding> *
            <documentAlias="xs:anyURI"/> ?
            <ruleAlias="xs:anyURI"/>
        </ruleBinding>
    </ruleBindings>
    <schemaBindings> ?
        <defaultSchema> ?
            <namespaceBinding/> *  
        </defaultSchema>
        <schemaBinding> *
            <namespaceBinding/> *  
            <documentAlias/> *     
        </schemaBinding>
        <noSchemaBinding> ?
            <documentAlias/> *     
        </noSchemaBinding>
    </schemaBindings>
    <definitions> ?
        <document> *
            <docInfo> ?
                    <baseURI> ?
                        xs:anyURI <!-- If a document has a baseURI, then this will be used to form the 
                                       base URI for all relative URIs subject to SML URI processing 
                                       contained by that document. -->            
                    </baseURI>        
                    <aliases> ?
                        <alias> *
                      xs:anyURI <!-- A URI by which SML references from other documents may 
                                           refer to this document. -->

                      xs:anyURI <!-- A URI by which SML references from other documents may refer to this document. -->

                        </alias>
                    </aliases>
            </docInfo>
                [
                <data>
                    xs:any <!-- At most one definition document goes here -->
                </data>
                |
                <base64Data>
                    xs:any <!-- At most one base64 encoded definition document goes here -->
                </base64Data>
                |
                <locator>
                    <documentURI/> ?
                        xs:any <!-- A URI or IRI that points to a definition document goes here -->
                </locator>
                ]
        </document>
    </definitions>
    <instances> ?
        <document> *
            <docInfo> ?
                <baseURI> ?
                     xs:anyURI <!-- If a document has a baseURI, then this will be used to form the 
                            base URI for all relative URIs subject to SML URI processing 
                            contained by that document. -->            
                </baseURI>        
                <aliases> ?
                   <alias> *
                       xs:anyURI <!-- A URI by which SML references from other documents may refer 
                                      to this document. -->                        

                       xs:anyURI <!-- A URI by which SML references from other documents may refer to this document. -->                        

                   </alias>
                </aliases>
            </docInfo>
            [
            <data>
                xs:any<!-- At most one instance document goes here -->
            </data>
            |
            <base64Data>
                xs:any <!-- At most one base64 encoded instance document goes here -->
            </base64Data>
            |
            <locator>
                <documentURI/> ?
                    xs:any <!-- A URI or IRI that points to an instance document goes here -->
            </locator>
            ]
        </document>
    </instances>
</model>

A document producer can specify the version of the specification under which the current document was generated, and with which conformance is claimed, in the SMLIFVerion attribute. For example, if this version of SML-IF is used as the basis of a document, the value of this attribute would be the value "1.1".

The identity element provides information applications can use to identify and describe the set of SML documents being interchanged. The baseURI child element is one way to specify a base URI to be used by relative URI references in the interchange model . Another way to specify a base URI is to use the document/docInfo/baseURI element. [ 5.3.2 Base URIs ]

The SMLIFVersion attribute is defined on the model element and may be useful when diagnosing failures encountered while processing SML-IF documents. For example, if a document asserts conformance with version 1.1 of the SML-IF specification and a human can see that it is not in fact conformant, then it is likely that the problem occurred during the production of the document. If the same document appears to humans to be conformant, then the focus of diagnosis might shift toward the SML-IF consumer and its invocation parameters.

The schemaComplete attribute is defined on the model element and is used to indicate that the schemas constructed from the definition documents in the interchange model are complete, in the sense that the validity of the interchanged SML model is fully determined by these schemas. Formally, however, the schemaComplete attribute does not express any assertion that the schemas so constructed are in fact complete, or that interchange model validation using these schemas will not result in any errors indicating that some components are missing from the schemas. The only formal effect of schemaComplete attribute with a value of true or 1 is to specify precisely the schemas with which interchange model validation is to be performed.

The optional ruleBindings element is used to contain information that associates rule documents with the documents they apply to. See 4.3 Rule Bindings for further details.

Every document in the interchange model appears as content of a document element in either the definitions or the instances element, depending on whether the document in question is a model definition or a model instance document. There can be at most one embedded document contained by a document/data element. Both definitions and instances are optional. So, for example, if there are no model definition documents being packaged, the definitions element must be omitted.

The first child of each document is typically a docInfo element that contains a baseURI element and a list of alias elements. The baseURI element can be used to specify a base URI for relative references in the document. Defining base URIs is specified in 5.3.2 Base URIs . The content of each alias element is a URI with no fragment component (i.e., one with no "#" in it). Each of the alias elements serves as a name that other documents can use to refer to this document. Examples of how aliases are used to handle URI references are given in 4.2 URI References .

A document in the interchange model can be represented in either of two ways, by embedding its content, or by providing a reference to it. Which is being used is indicated by the child of the document element. A document can be embedded as-is or in a base64 encoded format. In the former case, a data element is used to contain the actual content of the document whereas a base64Data element is used for the latter. The base64 format is typically used for, but is not restricted to, documents with DTD. If the document is being referenced rather than embedded, a locator element is used to contain the reference. The content of a locator can be a documentURI element defined by SML-IF or anything else understood by the SML-IF consumer .

Although it is not fully shown in the pseudo-schema above, the SML-IF schema has an "open content model." To provide extensibility, essentially every element in it can contain additional content and/or attributes from other XML namespaces.

4.2 URI References

When processing the SML model packaged inside an SML-IF document, certain URI references (as defined in RFC 3986 [ IETF RFC 3986 ]) may need to be processed to find their corresponding target. For example, in order to assess SML validity of the interchanged model, SML references using the SML URI Reference Scheme [ SML 1.1 ] need to be resolved. In addition, in order to assemble schemas from multiple schema documents as part of the interchange model validity assessment, the schemaLocation attribute on an xs:include element needs to be processed to locate the schema document.

To see how these URI references are handled, consider the following SML-IF document:

<?xml version="1.0" encoding="UTF-8"?>
<model xmlns="http://www.w3.org/ns/sml-if" version="1.0">
    <identity>
        <name>http://www.university.example.org/sml/models/Sample/InterDocReferences</name>
        <baseURI>http://www.university.example.org/Universities/</baseURI>   
    </identity>
    <definitions>
        <document>
            <data>
                <xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema">
                    <xs:include 
                        schemaLocation="http://www.university.example.org/university/enrollmodel.xsd"/>

                    <xs:include schemaLocation="http://www.university.example.org/university/enrollmodel.xsd"/>

                </xs:schema>     
            </data>      
        </document>
    </definitions>
 
    <instances>
        <document>
            <data>
                <Student xmlns="http://www.university.example.org/ns"
                         xmlns:sml="http://www.w3.org/2007/09/sml"
                         xmlns:u="http://www.university.example.org/ns">
                    <ID>1000</ID>
                    <Name>John Doe</Name>
                    <EnrolledCourses>
                        <EnrolledCourse sml:ref="true">
                            <!-- SML Reference to a course INside the interchange model -->                                     
                            <sml:uri>
                                http://www.university.example.org/Universities/MIT/Courses.xml#smlxpath1(/u:Courses/u:Course[u:Name='PHY101'])
                            </sml:uri>
                        </EnrolledCourse>
                        <EnrolledCourse sml:ref="true">
                            <!-- SML Reference to a course INside the interchange model -->                        
                            <sml:uri>
                                http://www.university.example.org/Universities/SFU/Courses.xml#smlxpath1(/u:Courses/u:Course[u:Name='MUSIC205'])
                            </sml:uri>
                        </EnrolledCourse>           
                        <EnrolledCourse sml:ref="true">
                            <!-- SML Reference to a course OUTside the interchange model -->                        
                            <sml:uri>
                                http://www.university.example.org/Universities/Capella/Courses.xml#smlxpath1(/u:Courses/u:Course[u:Name='LIT103'])
                            </sml:uri>
                        </EnrolledCourse>
                    </EnrolledCourses>
                </Student>
            </data>
        </document>
        <document>
            <!-- The following alias matches the first course referenced above -->
            <docInfo>
                <aliases>
                    <alias>http://www.university.example.org/Universities/MIT/Courses.xml</alias>
                </aliases>
            </docInfo>
            <data>
                <Courses xmlns="http://www.university.example.org/ns">
                    <Course>
                        <Name>PHY101</Name>
                    </Course>
                    <Course>
                        <Name>MAT200</Name>
                    </Course>
                </Courses>
            </data>
        </document>
        <document>
            <docInfo>
                <baseURI>SFU/Courses.xml</baseURI>
                    <!-- The following alias matches the second course referenced above (after
                    being converted to an absolute URI)  -->
                </aliases>
                    <alias>SFU/Courses.xml</alias>
                </aliases>
            </docInfo>
            <data>
                <Courses xmlns="http://www.university.example.org/ns">
                    <Course>
                        <Name>ENG106</Name>
                    </Course>
                    <Course>
                        <Name>MUSIC205</Name>
                    </Course>
                </Courses>
            </data>
        </document>   
    </instances>
</model>

When not packaged in an SML-IF document, certain URI references (e.g. values of sml:uri elements or certain schemaLocation attributes) are dereferenced to find their corresponding document. When these references are packaged in an SML-IF document, consumers of the SML-IF document need to first examine whether the target document or element is packaged in the same SML-IF document. To determine this, the fragment component, if any, is temporarily ignored to form a URI. This URI is then compared against the alias URIs of packaged model documents.

If the URI is equal to the URI in an alias element (see 5.3.1 URI equality ), the SML-IF consumer will not attempt to look for targets of this URI outside of the SML-IF document, although there may exist a document retrievable at this URI. If the URI is not equal to the URI in any alias element, then the SML-IF document does not contain the corresponding target of the original URI reference. The consumer may or may not attempt to look for targets outside of the SML-IF document, depending on the nature of the URI reference. Formal rules about how URI references are processed are defined in section 5.3.4 URI Reference Processing .

Several examples of resolving references can be seen in the example SML-IF document shown above, illustrating the use of both relative and absolute alias URI values. In the first example, a reference with an absolute URI, the following SML reference, must first be separated into its document URI and fragment components:

http://www.university.example.org/Universities/MIT/Courses.xml#smlxpath1(/u:Courses/u:Course[u:Name='PHY101'])

After removing the fragment, the document portion of the reference is:

http://www.university.example.org/Universities/MIT/Courses.xml

This document URI is equal to the URI listed in an alias accompanying the Courses document. So, by applying the fragment in the URI reference to the Courses document, we determine that the reference is to the Course element whose Name element has "PHY101" as its content.

The second example reference, using a relative URI, is processed similarly. The full reference is:

http://www.university.example.org/Universities/SFU/Courses.xml#smlxpath1(/u:Courses/u:Course[u:Name='MUSIC205'])

After removing the fragment, the document portion of the reference is:

http://www.university.example.org/Universities/SFU/Courses.xml

This URI is equal to an alias defined on the last instance document in the interchange model, after the model/identity/baseURI content is applied to the relative URI contained by the document’s document’s alias element. So, by applying the fragment in the reference to the Courses document, we determine that the reference is to the Course element whose Name element has "MUSIC205" as its content.

The third example, showing an unresolved reference, is processed similarly. The full reference is:

http://www.university.example.org/Universities/Capella/Courses.xml#smlxpath1(/u:Courses/u:Course[u:Name='LIT103'])

After removing the fragment, the document portion of the reference is:

http://www.university.example.org/Universities/Capella/Courses.xml

This document URI is not equal to the URI in any alias element. This means that it is an unresolved SML reference.

The URI:

http://www.university.example.org/university/enrollmodel.xsd 

(value of the schemaLocation attribute on the include element) is not equal to any alias . The SML-IF consumer may or may not attempt to locate a schema document using this URI reference.

4.3 Rule Bindings

[ SML 1.1 ] uses Schematron patterns embedded in SML schemas and in separate explicitly bound rule documents to express constraints that cannot be expressed in XML Schemas. Schematron patterns embedded in SML Schema documents all have well defined targets. [ SML 1.1 ] permits models in which rule documents apply to all, none, or subsets of the model's documents. SML-IF uses the list of ruleBinding elements contained in the optional ruleBindings element to associate rule documents with the documents in the interchange model to which they apply. Each ruleBinding associates the documents having an alias beginning with the URI prefix given in the documentAlias with the rule documents having an alias beginning with the prefix given in the ruleAlias . So, for example, the ruleBinding:

<ruleBinding>
    <documentAlias="http://www.university.example.org/sml/infrastructure/"/>
    <ruleAlias="http://www.university.example.org/sml/infrastructurerules/"/>
</ruleBinding>

Would associate documents that have the aliases such as:

http://www.university.example.org/sml/infrastructure/server427.xml

and

http://www.university.example.org/sml/infrastructure/switch6E.xml

with rule documents that have aliases such as:

http://www.university.example.org/sml/infrastructurerules/assetistracked.sch

and

http://www.university.example.org/sml/infrastructurerules/managedbycorporate.sch

SML-IF specifies rule bindings among documents in the interchange model. It does not specify rule bindings that apply to documents not in the interchange model. That said, it is often the case that the intent of transferring an SML-IF document is to relate its contents with other SML documents not in the interchange model. For example, the intent might be to merge the interchange model with an existing SML model. In such cases the context of use may choose to extend the definition of ruleBinding to bind documents not in the interchange model. For example, if the interchange model is merged into an existing model, the merge process might choose to extend the definition of ruleBinding elements to bind rule documents in the interchange model to documents in the merged model that weren't included in the interchange model.

4.4 Schema Bindings

Schema documents can be connected with other schema documents using composition features provided by XML Schema. This includes xs:include , xs:redefine , and xs:import . A schema document's validity may depend on other schema documents it includes/redefines/imports, or even other schema documents that include/redefine/import it. When performing interchange model validation over the SML model packaged in an SML-IF instance, an SML-IF consumer must draw associations between XML Schema definition documents and instance documents, both to completely validate XML Schema documents themselves and to establish the schema-validity of the instance documents.

The XML Schema specification provides more flexibility in constructing the schema used for assessment than is appropriate for the semantics defined by SML and SML-IF for interchange model validation.

  1. It allows XML Schema processors latitude in terms of locating schema documents (resolving namespace and schema location attributes) and composing schema documents together to form a single schema.

  2. Schema location attributes can be ignored in some cases ( xsi:schemaLocation in instance documents and schemaLocation attribute on xs:import ) and allowed to "fail to resolve" in others ( schemaLocation attribute on xs:include and xs:import ).

  3. Multiple imports of the same namespace allow all but the first one to be ignored.

As a result, SML-IF cannot guarantee general case interoperability based only on XML Schema and, therefore, needs to specify how to determine such associations. This section describes a method to achieve this goal.

An SML-IF document can be:

  1. Schema-complete - All schema documents are included in the SML-IF document, either as an 5.2.1 Embedded Documents or as 5.2.2 Referenced Documents .

  2. Schema-incomplete - Some required schema documents may not be included in the SML-IF document, either as an embedded document or a referenced document.

It is necessary for an SML-IF producer to declaratively distinguish between these two cases because making that distinction is not always possible for an SML-IF consumer based on the content alone. SML-IF uses the schemaComplete attribute on the model element to indicate whether this SML-IF document includes all necessary schema definition documents. When this attribute is specified with a value of "true", then the schema validity of the schema definition documents and instance documents depend only on built-in components or components from definition documents included in the SML-IF document. Built-in components include:

  1. four xsi: attributes (defined by XML Schema)

  2. all schema built-in types (xs:anyType and simple types defined in XML Schema Part 2)

  3. sml:ref attribute declaration

  4. sml:uri element declaration

An SML model represented by a schema-incomplete SML-IF document is not necessarily invalid. However, SML-IF cannot guarantee interoperability for a schema-incomplete SML-IF document.

SML-IF uses a list of schemaBinding elements contained in the optional schemaBindings element to associate a namespace with a set of schema documents in the interchange model and the instance documents that should be validated against this set of schema documents. Each namespaceBinding child of a schemaBinding element associates the namespace specified in its namespace attribute with the schema documents whose aliases are specified in its aliases attribute. In addition, the instance documents that are to be assessed against this set of schemas are specified in the documentAlias child element of the same schemaBinding element.

The following example illustrates schema bindings.

<schemaBindings>
    <!-- Each "schemaBinding" element corresponds to a schema and model
         instance documents that are assessed against this schema -->
    <schemaBinding>
        <!-- all "namespaceBinding" children together build the schema -->
        <namespaceBinding namespace="ns1" aliases="xsd1-a xsd1-b"/>
        <namespaceBinding namespace="ns2" aliases="xsd2-v1"/>
        <!-- list all applicable instances; same as for rule bindings -->
        <documentAlias>doc1</documentAlias>
        <documentAlias>doc2-v1-a</documentAlias>
        <documentAlias>doc2-v1-b</documentAlias>
    </schemaBinding>
    <schemaBinding>
        <namespaceBinding namespace="ns1" aliases="xsd1-a xsd1-b"/>
        <namespaceBinding namespace="ns2" aliases="xsd2-v2"/>
        <documentAlias>doc1</documentAlias>
        <documentAlias>doc2-v2</documentAlias>
    </schemaBinding>
</schemaBindings>
<definitions>
    <!-- schema documents for xsd1-a, xsd1-b, xsd2-v1, xsd2-v2 -->
</definitions>

There are cases where many instance documents use the same schema. In this case, it is desirable to have a default schema binding rather than specifying a schemaBinding that lists all these instance documents. The defaultSchema can be used to cover instance documents not included in any otherschemaBinding as in the following example.

<schemaBindings>
    <!-- The "defaultSchema" element corresponds to a schema that governs
         all instance documents *not* included in any "schemaBinding". -->
    <defaultSchema>
        <!-- all "namespaceBinding" children together build the schema -->
        <namespaceBinding namespace="ns1" aliases="ns1.xsd"/>
        <namespaceBinding namespace="ns2" aliases="ns2.xsd"/>
    </defaultSchema>
</schemaBindings>

There may be cases where an instance document should not be bound to any schema, including the default schema. The noSchemaBinding element can be used in this case to cover such instance documents as in the following example.

<schemaBindings>
    <!-- The "noSchemaBinding" element contains the aliases for 
         all instance documents *not* bound to any schema. -->
    <noSchemaBinding>
        <documentAlias>doc-a</documentAlias>
        <documentAlias>doc-b</documentAlias>
    </noSchemaBinding>
</schemaBindings>

4.5 Interoperability of SML Models

The goal of SML-IF is to enable the exchange of SML models. However, this interoperability goal is affected by several aspects of SML models.

  1. Use of the SML URI Reference Scheme as defined in the SML specification is the only guaranteed way of achieving interoperability for all SML references in the model. Use of any other reference scheme requires that the SML-IF consumer know about its use in the document and understand how to dereference it.

  2. SML documents can be included by reference using the locator element and, therefore, are not directly embedded in the SML-IF document. This can be very useful, especially when the SML-IF document is large or when the documents are readily accessible to the consumer. However, the locator element may be ignored by the consumer, may not resolve, or may resolve to different resources in different contexts. Because of these uncertainties, interoperability is not guaranteed when documents are included by reference.

  3. The SML-IF document may be schema-incomplete [ 4.4 Schema Bindings ]. An SML model represented by a schema-incomplete SML-IF document is not necessarily invalid. However, SML-IF cannot guarantee interoperability for a schema-incomplete SML-IF document.

  4. The SML-IF document may use reference schemes that do not use target-complete identifiers. In addition to the requirements imposed by SML on reference scheme definitions, SML-IF imposes additional requirements on references schemes that do not use target-complete identifiers in order to make them useful in the context of SML-IF [ 5.3.4 URI Reference Processing ].

  5. The presence of relative references subject to SML-IF URI processing introduces the necessity to transform them into absolute references [ 5.3.4 URI Reference Processing ]. SML-IF provides two alternative mechanisms [ 5.3.2 Base URIs ] for doing so, one of which is deprecated. SML-IF producers can construct SML-IF documents that use either only absolute URIs or both base URI mechanisms in order to achieve interoperability with the maximum number of consumers.

5. SML Interchange Format Definition

This section normatively defines the Service Modeling Language Interchange Format (SML-IF). It defines the requirements that SML-IF documents must adhere to and how URI references contained in them are to be interpreted by consumers of SML-IF documents.

5.1 Conformance Criteria

SML-IF defines two levels of conformance for SML-IF Documents:

  1. Minimal Conformance: A minimally conforming SML-IF Document MUST adhere to all SML-IF document requirements as described in the normative sections of this specification.

  2. Reference Conformance: A referentially conforming SML-IF Document MUST adhere to all SML-IF document requirements as described in the normative sections of this specification. In addition, each non-null SML reference in the document MUST be an instance of the SML URI Reference Scheme [ SML 1.1 ].

A conforming SML-IF Producer MUST be able to generate a referentially conforming SML-IF Document from a conforming SML model.

Note:

When a producer generates a referentially conforming SML-IF document from a conforming source model, it is expected that the source model and the generated model are equivalent. That is, the source model and the destination model both have the same validity, same number of documents with similar structure and content differing only in places where references are updated to have equivalent SML URI scheme representation. However, this specification does not normatively define the notion of model equivalence.

A conforming SML-IF Consumer MUST process a conforming SML-IF Document using, in whole or part, semantics defined by this specification. It is OPTIONAL that a conforming SML-IF Consumer process all elements defined in this specification, but any element that is processed MUST be processed according to the requirements stated in the normative sections of this specification. In particular, if a conforming SML-IF Consumer performs interchange model validation , then that process MUST be performed as described in this specification.

5.2 SML-IF Documents

The purpose of SML-IF is to package the set of documents that constitute an SML model into a standard format so that it can be exchanged in a standard way.

An SML-IF document MUST be a well-formed XML document [ XML ].

An SML-IF document MUST be valid under the XML Schema given in Appendix A.

The definition and instance documents packaged by an SML-IF document MAY form a valid SML model but it is not required to do so.

Each document in the interchange model MUST be represented in the SML-IF document by a separate document element as follows:

  1. Each definition document in the interchange model MUST appear as a descendant of a model/definitions/document element. The order of the document children is not significant.

  2. Each instance document in the interchange model MUST appear as a descendant of a model/instances/document element. The order of the document children is not significant.

Each document in the interchange model MUST be included in the SML-IF document either as an embedded document (where the document to be included is embedded in the SML-IF document) or by including a reference to the document.

5.2.1 Embedded Documents

Documents that are to be embedded in the SML-IF document MUST be embedded as text or in an encoded format as follows:

  1. If the document is embedded as text, it MUST be included as the content of a model/definitions/document/data element if it is a definition document or a model/instances/document/data element if it is an instance document. Each model/*/document/data element MUST contain at most one document.

  2. If the document is embedded in an encoded format, then the octet stream representing the document MUST be encoded in base64 format. The resultant data stream MUST be embedded as the content of a model/definitions/document/base64Data element if it is a definition document or a model/instances/document/base64Data element if it is an instance document. Each model/*/document/base64Data element MUST contain at most one document. Documents that contain a DTD MUST be embedded in this encoded format.

When extracting an embedded document that is contained in a base64Data element, an SML-IF consumer MUST decode the content of the base64Data element first and then process the resulting document as an embedded instance document. All embedded instance documents not encoded in base64 MUST be processed as if they contained the same DTD as the one associated with the SML-IF document.

If the model/*/document/data element has no child element, then an SML-IF consumer MUST treat the document as if it is not part of the interchange model. If the model/*/document/base64Data element has a zero-length sequence of octets as its value, then an SML-IF consumer MUST treat the document as if it is not part of the interchange model.

5.2.2 Referenced Documents

Documents that are to be referenced rather than embedded MUST be included as follows:

  1. If the document is a definition document, the location of the document MUST be included as the content of a model/definitions/document/locator element.

  2. If the document is an instance document, the location of the document MUST be included as the content of a model/instances/document/locator element.

SML-IF specifies one way that MAY be used to provide the location of the referenced document, the documentURI element. It is a consequence of documentURI schema definition that it contains a URI reference, i.e., it may be an absolute URI or relative reference. When it is a relative reference, the [base URI] property SHOULD be used to transform it to an absolute URI, as stated in [ 5.3.2 Base URIs ].

An SML-IF consumer MAY choose to locate a referenced document. If an SML-IF consumer chooses not to locate a referenced document or if it attempts to locate the referenced document and this attempt fails, then the SML-IF consumer MUST treat the referenced document as if it is not part of the interchange model . If either of these conditions occurs, the SML-IF consumer SHOULD make its invoker aware of this condition.

5.2.3 Schema Completeness

The smlif:schemaComplete attribute is defined on the model element. The attribute indicates whether or not all the definition documents required for interchange model validation are included in the interchange model .

If schemaComplete has the value true or 1 , then schemas used for interchange model validation MUST contain only schema components declared in built-in components or in model definition documents within the interchange model. If schemaComplete has the value false or 0 , then this specification does not constrain whether or not definition documents required for interchange model validation are retrieved from outside the interchange model.

5.2.4 SML-IF Document Version

An SML-IF producer MAY specify the version of the SML-IF specification with which conformance is declared by including the version number of the relevant specification as the value of the SMLIFVersion attribute in the document's model element. This value MUST be "1.1" for documents declared by the producer to conform to the SML-IF 1.1 specification. SML-IF Consumers MUST attempt to process an SML-IF document regardless of the value of the SMLIFVersion attribute. That is, an SML-IF Consumer MUST NOT reject the document solely because of the value of the SMLIFVersion attribute.

Note:

Requiring SML-IF consumers to continue processing in the face of unknown version values makes it easier to deploy documents that support future versions of this specification.

5.3 URI References

5.3.1 URI equality

SML-IF uses URI equality extensively to handle references among documents in the interchange model. To determine whether two URIs are equal, SML-IF consumers MUST perform case sensitive codepoint-by-codepoint comparison of the corresponding characters in the URI references.

5.3.2 Base URIs

If a document in the interchange model contains a relative reference subject to SML-IF URI processing (see 5.3.4 URI Reference Processing ), then the base URI used to transform the relative URI reference into an absolute URI is the value of its [base URI] property according to the rules in section 4.3 of XML Base . When a base URI is needed to transform a relative reference, then the information necessary to calculate the [base URI] property MUST be embedded within the SML-IF document’s document’s content using at least one of the following mechanisms.

  1. The base URI is embedded using the xml:base attribute according to XML Base . The value of an element's [base URI] property is calculated according to XML Base .

  2. The base URI is embedded using the smlif:baseURI element as described in 5.3.2.1 smlif:baseURI . The value of an element's [base URI] property is calculated as described in that section.

Note:

Because this specification requires that the base URI information be embedded in the document content, it follows that an element’s element’s [base URI] will never be computed from the URI of the document entity or external entity (see section 4.2 of XML Base ) containing the element.

SML-IF consumers MUST support at least one of these mechanisms. The selection of which base URI mechanism(s) a consumer’s consumer’s implementation supports is implementation-defined, i.e. it might be done as a fixed coding choice, as a run-time parameter, by scanning the content, or through any other means. SML-IF producers MUST support xml:base and MAY support smlif:baseURI .

If an SML-IF consumer supports both mechanisms and the interchange model document it is consuming contains markup for both mechanisms, then the SML-IF consumer MUST use the [base URI] value calculated using the xml:base mechanism.

All of the base URI mechanisms used in each interchange model document MUST be used consistently. In other words, all of the base URI mechanisms whose markup appears in the document MUST result in the s ame [base URI] value being calculated for each relative reference subject to SML-IF URI processing. SML-IF consumers MAY check this consistency.

Note:

As a consequence of the granularity of the consistency requirement, a single SML-IF document may use different mechanisms in distinct interchange model documents. In this scenario, it is true that only consumers that support all mechanisms used would be able to process the entire SML-IF document correctly.

Consistency checking of base URI results by SML-IF consumers is made optional to avoid requiring the potential overhead of performing twice as many calculations per relative reference as is minimally required to consume the model. An SML-IF consumer might choose to check base URI mechanism consistency based on input parameters, always, never, or based on any other criteria it chooses. If both base URI mechanisms are used in a given interchange model document contained within a conforming SML-IF document, and a consumer understands both mechanisms, such a consumer must use the xml:base mechanism to compute the [base URI] property. This consumer may choose to ignore the smlif:baseURI information or it may choose to verify that consistent results are obtained from both mechanisms. If both base URI mechanisms are used in a given interchange model document contained within a non-conforming SML-IF document, SML-IF provides no guarantees about the consistency of any [base URI] property computed using both mechanisms.

SML-IF producers have several combinations to consider when defining base URIs in an SML-IF document:

  1. When the interchange model contains no relative URI references subject to SML-IF URI processing, neither xml:base nor smlif:baseURI is necessary.

  2. When relative URI references subject to SML-IF URI processing exist in the interchange model and all require the same base URI value, providing an xml:base or smlif:baseURI value for the model element is sufficient.

  3. When relative URI references subject to SML-IF URI processing exist in the interchange model and they require different base URI values, a combination of xml:base values or a combination of smlif:baseURI values can be used to ensure each document has the correct base URI.

  4. When relative URI references subject to SML-IF URI processing exist within the same SML model document and they require different base URI values, xml:base can be used within the document to ensure that each relative URI has the correct base URI.

5.3.2.1 smlif:baseURI

This syntax is supported in this version of the SML-IF specification for compatibility with existing SML-IF documents. It is, however, deprecated and may be removed in a future version of this specification.

In the smlif:baseURI mechanism, two base URI values values are used to compute the value of an element’s element’s [base URI] property, which is then used to resolve relative URI references defined in the interchange model that are subject to SML-IF URI processing (see 5.3.4 URI Reference Processing ).

Interchange model base URI

A URI reference that complies with the “absolute-URI” “absolute-URI” production as defined in RFC 3986 ([ IETF RFC 3986 ]). The value of the interchange model base URI is the content of the /model/identity/baseURI element, if any.

Note:

This is roughly equivalent to specifying the same value in an xml:base attribute on the /model element.

Document base URI

A URI reference that complies with the “absolute-URI” “absolute-URI” production as defined in RFC 3986 ([ IETF RFC 3986 ]). Each document in the interchange model has a document base URI whose value is a computed value.

For each document in the interchange model, the value of the document base URI is computed as follows:

  1. If the document has a docInfo/baseURI element, let U be its value.

    1. If U is a relative reference, let B be the value of the interchange model base URI . Then the value of the document base URI is the result of transforming U into an absolute URI, using B as the base URI.

    2. Otherwise the value of the document base URI is U .

  2. Otherwise if the interchange model base URI has a value, then the value of the document base URI is the value of the interchange model base URI.

  3. Otherwise, the document base URI has no value.

According to the smlif:baseURI mechanism, the [base URI] property of an element is calculated as follows:

  1. If the element is part of a document in the interchange model (i.e. it has as one of its ancestor elements smlif:locator, smlif:data, smlif:base64Data), its [base URI] value is the document base URI .

  2. Otherwise, its [base URI] value is the interchange model base URI .

5.3.3 Document Aliases

For each document in the interchange model , the document element contains a set of zero or more alias elements that are used to define the aliases of the document.

Conceptually, each document in the interchange model has the following property:

[aliases]

A set of URI references that comply with the “absolute-URI” “absolute-URI” production as defined in RFC 3986 ([ IETF RFC 3986 ]).

The value of the content of [aliases] is computed as follows:

  1. For each alias child element under the model document’s document’s docInfo/aliases , there is a corresponding member in the [aliases] . Let U be the value of such child element:

    1. If U is a relative reference, let B be value of the [base URI] property of the containing alias element, then [aliases] contains the result of transforming U into an absolute URI, using B as the base URI, as defined in section 5 of RFC 3986 ([ IETF RFC 3986 ]).

    2. Otherwise [aliases] contains U .

Aliases MUST be unique. That is, there MUST NOT exist two model documents whose [aliases] properties overlap.

Note:

As a consequence of the above property definition’s definition’s reliance on the “absolute-URI” “absolute-URI” production, the alias elements MUST NOT contain fragment components.

5.3.4 URI Reference Processing

When processing an SML-IF document, there are 3 categories of URI references that may need to be resolved:

  1. schemaLocation attributes on xs:include and xs:redefine in schema documents, when they are model definition documents.

  2. URI references specified in instances of SML reference schemes that use target-complete identifiers [ SML 1.1 ].

  3. URI references specified in instances of SML reference schemes that do not use target-complete identifiers.

It is clear which references fall into category #1. An example of category #2 is URI references used in SML references that use the SML URI Reference Scheme. When new reference schemes that use URI references are defined, whether they fall into category #2 or #3 will be clear from the reference scheme definitions. Resolution of URI references in category #3 is defined in their respective scheme definitions. It is also possible to have reference schemes that do not use URI references. Their resolution is governed by their scheme definitions and is not covered by this section.

To process a URI reference UR that is within categories #1 or #2 above, the following steps are performed:

  1. Determine the document D that possibly contains the target:

    1. If UR is a same-document reference [ IETF RFC 3986 ], then D is the model document that contains UR .

    2. Otherwise

      1. If UR has a fragment component, then let UR' be the URI reference formed by removing the fragment component; otherwise let UR' be UR .

      2. If UR' is a relative reference, then transform UR' to form an (absolute) URI U , using its [base URI] as the base URI, as defined in section 5 of RFC 3986 ([ IETF RFC 3986 ]); otherwise let U be UR' .

      3. If there exists a model document with an alias URI that is equal to U ( 5.3.1 URI equality ), then D is that document; otherwise D has no value.

  2. If D has no value, then

    1. If UR is within category #1 ( schemaLocation ), then the SML-IF document does not contain the target schema document. Whether the SML-IF consumer continues to dereference UR or U is governed by other sections of this specification.

    2. Otherwise ( UR is within category #2, used in an SML reference), UR has no target.

  3. If D has a value, then

    1. If UR is within category #1 ( schemaLocation ), then UR has a target if and only if all of the following are true.

      1. D is a schema document that is also a model definition document in the interchange model.

      2. UR does not contain a fragment component.

    2. If UR is within category #2, then

      1. If UR does not contain a fragment component, then it targets the root element of D.

      2. Otherwise ( UR contains a fragment component), the fragment component of UR is applied to the root element of D , which may result in 0, 1, or many target elements.

To process a URI reference UR that is within category #3 above, a set of steps corresponding to those described above for categories #1 and #2 MUST be defined as part of the reference scheme definition.

5.4 Document Bindings

5.4.1 URI Prefix Matching

To associate SML rule or schema documents with the subset of documents in the model to which they apply, SML-IF uses a combination of the alias mechanism described above [ 5.3.3 Document Aliases ] and URI prefix matching.

Two URIs, one called the prefix , and one called the target participate in URI prefix matching. The target is said to match the prefix if and only if the target, truncated to the length of the prefix, is equal to the prefix as defined in section 5.3.1 URI equality .

5.4.2 Rule Bindings

A rule binding is an association of a set of one or more rule documents with a set of zero or more model documents. The documents associated with a given rule document are said to be "bound" to it. For a model to be valid, every document in the model must conform to the constraints defined by every rule document it is bound to. It is permissible for a rule document to have no bindings associated with it, and for a model document to be bound to zero rule documents.

The ruleBinding element is used in SML-IF to express rule bindings. In any given binding the set of rule documents is that subset of rule documents in the interchange model with an alias that matches the URI prefix given by the content of the ruleAlias element. The set of model documents in the binding is that subset of the documents in the interchange model with an alias that matches the URI prefix given by the content of the documentAlias element. If the documentAlias element is omitted in a ruleBinding , the set of model documents in the binding is all documents in the interchange model.

Note:

Since the URI prefixes specified as ruleAlias and documentAlias elements are aliases, they are subject to all of the processing for aliases as described in [ 5.3.3 Document Aliases ]. For example, if they are relative references then they would be transformed to absolute URIs before comparison.

SML-IF consumers MAY choose to extend the sets of documents involved in bindings to include documents not contained in the interchange model. For example, if an SML-IF document is used to represent a model fragment that is intended to be merged with some other model, it is entirely possible that some or all of the bindings may involve not just the documents in the interchange model, but documents in the other model.

5.4.3 Schema Bindings

SML-IF consumers MAY choose to ignore the schemaBindings element when present in the SML-IF document, in which case the consumer SHOULD make its invoker aware of this situation.

If an SML-IF consumer chooses to process the schemaBindings element, then, as part of the interchange model validation , for every schema binding SB in the model, i.e. every /model/schemaBindings/schemaBinding element, the SML-IF consumer MUST perform the following steps for instance document validation.

  1. Compose a schema using all documents specified under all SB 's namespaceBinding children.

  2. Whenever an import for a namespace N is encountered, perform the following steps.

    1. If there is a namespaceBinding child of SB whose namespace attribute matches N , then components from schema documents listed in the corresponding aliases attribute are used. As with rule bindings, URI prefixing [ 5.4.1 URI Prefix Matching ] is used for matching schema document aliases. At most one namespaceBinding is allowed per namespace N within a given SB . If more than one namespace binding exists for the namespace as part of a single schema binding, the SML-IF document is in error. If the set of aliases for namespace N is empty, the namespace has no schema documents defining it in the schema binding.

    2. Otherwise, if there are schema documents in the SML-IF document whose targetNamespace is N , then components from all those schema documents are used.

    3. Otherwise, if this is a schema-complete SML-IF document ( /model/@schemaComplete = "true"), then no component from N (other than built-ins) is included in the schema being composed.

    4. Otherwise, it is implementation-defined whether SML-IF consumer attempts to retrieve components for N from outside the SML-IF document.

  3. Whenever an include or redefine is encountered, the schemaLocation is used to match aliases of schema documents, as with base SML-IF.

    1. If there is a schema document in the SML-IF document matching that alias, then that document is used.

    2. Otherwise, if this is a schema-complete SML-IF document, then the include or redefine is unresolved (which is allowed by XML Schema validity assessment rules).

    3. Otherwise, it is implementation-defined whether an SML-IF consumer attempts to resolve include or redefine to schema documents outside the SML-IF document.

  4. The instance documents that are referenced in the documentAlias element of SB MUST be validated against the schema constructed in steps 1 through 3. sml:target* and SML identity constraints can now be checked. Similar to documentAlias under ruleBinding elements [ 5.4.2 Rule Bindings ], each documentAlias can refer to multiple documents via URI prefixing.

Whether or not a schemaBindings element is present or is ignored, SML-IF consumers MUST process an include or redefine element as described in step 3 above.

The common use case where match-all namespace matching is desired can be achieved by omitting schemaBindings without introducing any additional complexity into the SML-IF document.

If an SML-IF consumer chooses to process the schemaBindings element, then the following rules regarding the default schema must be followed:

  1. If the optional defaultSchema element is present, then an SML-IF consumer MUST compose a default schema from this element following rules 1 to 3 above, replacing SB in the text with DS (i.e., the /model/schemaBindings/defaultSchema element).

  2. Otherwise, an SML-IF consumer MUST compose a default schema using all schema documents included in the SML-IF document.

  3. An SML-IF consumer MUST use this default schema to validate those SML instance documents whose alias is not matched by any documentAlias in a schemaBinding element or noSchemaBinding element. Note that URI prefixing [ 5.4.1 URI Prefix Matching ] is used for matching document aliases.

Otherwise, if an SML-IF consumer chooses not to process the schemaBindings element, then In all other cases, the SML-IF consumer MUST compose a schema using all schema documents included in the SML-IF document and MUST use this schema to validate all instance documents in the interchange model .

Note:

Examples of these cases include:

  1. An SML-IF consumer chooses not to process the schemaBindings element.

  2. No schema documents are found among the SML-IF document's definition documents.

Note:

The distinction between schema and schema documents is both intentional and important; the absence of schema documents does not imply the absence of a schema. A schema containing only built-in components will be constructed given zero schema documents as input, and this schema will be used to validate all instance documents in the interchange model. This distinction has an impact on model validation results according to the definition of validity for a conforming SML model [ 5.1 Conformance Criteria ].

6. References

6.1 Normative

[SML 1.1]
Service Modeling Language, Version 1.1 , Bhalchandra Pandit, Valentina Popescu, Virginia Smith, Editors. World Wide Web Consortium, 25 November 2008. 12 February 2009. This version of the Service Modeling Language specification is available at http://www.w3.org/TR/2008/CR-sml-20081125/. http://www.w3.org/TR/2009/PR-sml-20090212/. The latest version of Service Modeling Language, Version 1.1 is available at http://www.w3.org/TR/sml/
[XML Schema Structures]
XML Schema Part 1: Structures Second Edition , H. Thompson, D. Beech, M. Maloney, and N. Mendelsohn, Editors. World Wide Web Consortium, 2 May 2001, revised 28 October 2004. This version of the XML Schema Part 1 Recommendation is http://www.w3.org/TR/2004/REC-xmlschema-1-20041028. The latest version of XML Schema Part 1 is available at http://www.w3.org/TR/xmlschema-1.
[XML Schema Datatypes]
XML Schema Part 2: Datatypes Second Edition , P. Byron and A. Malhotra, Editors. World Wide Web Consortium, 2 May 2001, revised 28 October 2004. This version of the XML Schema Part 2 Recommendation is http://www.w3.org/TR/2004/REC-xmlschema-2-20041028. The latest version of XML Schema Part 2 is available at http://www.w3.org/TR/xmlschema-2.
[XML]
Extensible Markup Language (XML) 1.0 (Fourth Edition) , T. Bray, J. Paoli, C. M. Sperberg-McQueen, and E. Maler, Editors. World Wide Web Consortium, 10 February 1998, revised 16 August 2006. This version of the XML 1.0 Recommendation is http://www.w3.org/TR/2006/REC-xml-20060816/. The latest version of XML 1.0 is available at http://www.w3.org/TR/REC-xml.
[XML Information Set]
XML Information Set , John Cowan and Richard Tobin, Editors. World Wide Web Consortium, 4 February 2004. This version of the XML Infoset Recommendation is http://www.w3.org/TR/2004/REC-xml-infoset-20040204/. The latest version of the XML Infoset is available at http://www.w3.org/TR/xml-infoset/.
[XML Base]
XML Base , Jonathan Marsh, Editor. World Wide Web Consortium, 27 June 2001. This version of the XML Base Recommendation is http://www.w3.org/TR/2001/REC-xmlbase-20010627/. The latest version of XML Base is available at http://www.w3.org/TR/xmlbase/.
[IETF RFC 3986]
Uniform Resource Identifier (URI): Generic Syntax , T. Berners-Lee, R. Fielding, L. Masinter Authors. Internet Engineering Task Force, January 2005. Available at http://www.ietf.org/rfc/rfc3986.txt.
[IETF RFC 2119]
Key words for use in RFCs to Indicate Requirement Levels , S. Bradner, Author. Internet Engineering Task Force, June 1999. Available at http://www.ietf.org/rfc/rfc2119.txt.

6.2 Non-Normative

[ISO/IEC 19757-3]
Information technology Document Schema Definition Languages (DSDL) Part 3: Rule-based validation Schematron . International Organization for Standardization and International Electrotechnical Commission, 1 January 2006. Available at http://standards.iso.org/ittf/PubliclyAvailableStandards/c040833_ISO_IEC_19757-3_2006(E).zip
[Canonical XML]
Canonical XML , J. Boyer, Author. World Wide Web Consortium, 15 March 2001. This version of the Canonical XML Recommendation is http://www.w3.org/TR/2001/REC-xml-c14n-20010315. The latest version of Canonical XML is available at http://www.w3.org/TR/xml-c14n.
[XML-Signature]
XML-Signature Syntax and Processing , D. Eastlake, J. Reagle, and D. Solo, Editors. Internet Engineering Task Force & World Wide Web Consortium, 12 February 2002. This version of the XML-Signature Syntax and Processing Recommendation is http://www.w3.org/TR/2002/REC-xmldsig-core-20020212/. The latest version of XML-Signature Syntax and Processing is available at http://www.w3.org/TR/xmldsig-core/.
[WS-Addressing Core]
Web Services Addressing 1.0 - Core , M. Gudgin, M. Hadley, and T. Rogers, Editors. World Wide Web Consortium, 9 May 2006. This version of the WS-Addressing Core Recommendation is http://www.w3.org/TR/2006/REC-ws-addr-core-20060509/. The latest version of WS-Addressing Core is available at http://www.w3.org/TR/ws-addr-core/.
[WSDL 2.0 Core Language]
Web Services Description Language (WSDL) Version 2.0 Part 1: Core Language , R. Chinnici, M. Gudgin, J-J. Moreau, S. Weerawarana, Editors. World Wide Web Consortium, 23 May 2007. This version of the "Web Services Description Language (WSDL) Version 2.0 Part 1: Core Language" Specification is available is available at http://www.w3.org/TR/2007/PR-wsdl20-20070523/. The latest version of "Web Services Description Language (WSDL) Version 2.0 Part 1: Core Language" is available at http://www.w3.org/TR/wsdl20/.
[XLink]
XML Linking Language (XLink) Version 1.0 , Steve DeRose, Eve Maler, David Orchard, Editors. World Wide Web Consortium, 27 June 2001. This version of the XLink Recommendation is http://www.w3.org/TR/2001/REC-xlink-20010627/ The latest version of XLink is available at http://www.w3.org/TR/xlink/.
<?xml version="1.0" encoding="utf-8"?> <!--

A. SML-IF Schema

<!--
/*
 * Copyright © 2008 World Wide Web Consortium,

 * Copyright © ns World Wide Web Consortium,

 *
 * (Massachusetts Institute of Technology, European Research Consortium for
 * Informatics and Mathematics, Keio University). All Rights Reserved. This
 * work is distributed under the W3C® Document License [1] in the hope that

 * work is distributed under the W3C® Document License [1] in the hope that

 * it will be useful, but WITHOUT ANY WARRANTY; without even the implied
 * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
 *
 * [1] http://www.w3.org/Consortium/Legal/2002/copyright-documents-20021231
 */
-->
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" 
    xmlns:smlif="http://www.w3.org/ns/sml-if" 
    targetNamespace="http://www.w3.org/ns/sml-if" 
    elementFormDefault="qualified" 
    blockDefault="#all" 
    version="1.0" 
    xml:lang="EN" 
    finalDefault="" 
    attributeFormDefault="unqualified">

--><xs:schemaxmlns:xml="http://www.w3.org/XML/1998/namespace"
      xmlns:xs="http://www.w3.org/2001/XMLSchema"
      xmlns:smlif="http://www.w3.org/ns/sml-if"
      targetNamespace="http://www.w3.org/ns/sml-if"
      elementFormDefault="qualified"
      blockDefault="#all"
      version="1.0"
      xml:lang="EN"
      finalDefault=""
      attributeFormDefault="unqualified">

  <xs:element name="model" type="smlif:modelType"/>
  <xs:complexType name="modelType" mixed="false">
    <xs:sequence>
      <xs:element name="identity" type="smlif:identityType"/>
      <xs:element ref="smlif:ruleBindings" minOccurs="0"/>
      <xs:element ref="smlif:schemaBindings" minOccurs="0"/>
      <xs:element name="definitions" type="smlif:documentCollectionType" minOccurs="0"/>
      <xs:element name="instances" type="smlif:documentCollectionType" minOccurs="0"/>
      <xs:any namespace="##other" processContents="lax" minOccurs="0" maxOccurs="unbounded"/>

      <xs:element
            name="definitions"
            type="smlif:documentCollectionType"
            minOccurs="0"/>
      <xs:element
            name="instances"
            type="smlif:documentCollectionType"
            minOccurs="0"/>
      <xs:any
            namespace="##other"
            processContents="lax"
            minOccurs="0"
            maxOccurs="unbounded"/>

    </xs:sequence>
    <xs:attribute name="SMLIFVersion" type="xs:token" use="optional"/>
    <xs:attribute name="schemaComplete" type="xs:boolean" default="false"/>

    <xs:attribute
          name="SMLIFVersion"
          type="xs:token"
          use="optional"/>
    <xs:attribute
          name="schemaComplete"
          type="xs:boolean"
          default="false"/>

    <xs:anyAttribute namespace="##other" processContents="lax"/>
  </xs:complexType>
  
   <!-- If there is a need for localized string values, e.g. in displayName
         or description, the sml:locid global attribute can be
         used -->
   
  <xs:complexType name="identityType" mixed="false">
    <xs:sequence>
      <xs:element name="name" type="smlif:uriType"/>
      <xs:element name="version" type="smlif:tokenType" minOccurs="0"/>
      <xs:element name="displayName" type="smlif:displayType" minOccurs="0"/>
      <xs:element name="baseURI" type="smlif:uriType" minOccurs="0"/>
      <xs:element name="description" type="smlif:displayType" minOccurs="0"/>
      <xs:any namespace="##other" processContents="lax" minOccurs="0" maxOccurs="unbounded"/>

      <xs:element
            name="version"
            type="smlif:tokenType"
            minOccurs="0"/>
      <xs:element
            name="displayName"
            type="smlif:displayType"
            minOccurs="0"/>
      <xs:element
            name="baseURI"
            type="smlif:uriType"
            minOccurs="0"/>
      <xs:element
            name="description"
            type="smlif:displayType"
            minOccurs="0"/>
      <xs:any
            namespace="##other"
            processContents="lax"
            minOccurs="0"
            maxOccurs="unbounded"/>

    </xs:sequence>
    <xs:anyAttribute namespace="##other" processContents="lax"/>
  </xs:complexType>
  <xs:complexType name="displayType" mixed="false">
    <xs:simpleContent>
      <xs:extension base="xs:string">
        <xs:anyAttribute namespace="##other" processContents="lax"/>

        <xs:anyAttribute
              namespace="##other"
              processContents="lax"/>

      </xs:extension>
    </xs:simpleContent>
  </xs:complexType>
  <xs:complexType name="tokenType" mixed="false">
    <xs:simpleContent>
      <xs:extension base="xs:token">
        <xs:anyAttribute namespace="##other" processContents="lax"/>

        <xs:anyAttribute
              namespace="##other"
              processContents="lax"/>

      </xs:extension>
    </xs:simpleContent>
  </xs:complexType>
  <xs:complexType name="uriType" mixed="false">
    <xs:simpleContent>
      <xs:extension base="xs:anyURI">
        <xs:anyAttribute namespace="##other" processContents="lax"/>

        <xs:anyAttribute
              namespace="##other"
              processContents="lax"/>

      </xs:extension>
    </xs:simpleContent>
  </xs:complexType>
  <xs:element name="ruleBindings" type="smlif:ruleBindingCollectionType"/>
  <xs:complexType name="ruleBindingCollectionType" mixed="false">

  <xs:element
        name="ruleBindings"
        type="smlif:ruleBindingCollectionType"/>
  <xs:complexType
        name="ruleBindingCollectionType"
        mixed="false">

    <xs:sequence>
      <xs:element ref="smlif:ruleBinding" maxOccurs="unbounded"/>
      <xs:any namespace="##other" processContents="lax" minOccurs="0" maxOccurs="unbounded"/>

      <xs:any
            namespace="##other"
            processContents="lax"
            minOccurs="0"
            maxOccurs="unbounded"/>

    </xs:sequence>
    <xs:anyAttribute namespace="##other" processContents="lax"/>
  </xs:complexType>
  <xs:element name="ruleBinding" type="smlif:ruleBindingType"/>
  <xs:complexType name="ruleBindingType" mixed="false">
    <xs:sequence>
      <xs:element name="documentAlias" type="smlif:uriType" minOccurs="0"/>

      <xs:element
            name="documentAlias"
            type="smlif:uriType"
            minOccurs="0"/>

      <xs:element name="ruleAlias" type="smlif:uriType"/>
      <xs:any namespace="##other" processContents="lax" minOccurs="0" maxOccurs="unbounded"/>

      <xs:any
            namespace="##other"
            processContents="lax"
            minOccurs="0"
            maxOccurs="unbounded"/>

    </xs:sequence>
    <xs:anyAttribute namespace="##other" processContents="lax"/>
  </xs:complexType>
  <xs:element name="schemaBindings" type="smlif:schemaBindingCollectionType"/>
  <xs:complexType name="schemaBindingCollectionType" mixed="false">

  <xs:element
        name="schemaBindings"
        type="smlif:schemaBindingCollectionType"/>
  <xs:complexType
        name="schemaBindingCollectionType"
        mixed="false">

    <xs:sequence>
      <xs:element ref="smlif:defaultSchema" minOccurs="0"/>
      <xs:element ref="smlif:schemaBinding" minOccurs="0" maxOccurs="unbounded"/>
      <xs:element ref="smlif:noSchemaBinding" minOccurs="0" maxOccurs="1"/>
      <xs:any namespace="##other" processContents="lax" minOccurs="0" maxOccurs="unbounded"/>

      <xs:element
            ref="smlif:schemaBinding"
            minOccurs="0"
            maxOccurs="unbounded"/>
      <xs:element
            ref="smlif:noSchemaBinding"
            minOccurs="0"
            maxOccurs="1"/>
      <xs:any
            namespace="##other"
            processContents="lax"
            minOccurs="0"
            maxOccurs="unbounded"/>

    </xs:sequence>
    <xs:anyAttribute namespace="##other" processContents="lax"/>
  </xs:complexType>
  <xs:element name="schemaBinding" type="smlif:schemaBindingType"/>

  <xs:element
        name="schemaBinding"
        type="smlif:schemaBindingType"/>

  <xs:complexType name="schemaBindingType" mixed="false">
    <xs:sequence>
      <xs:element ref="smlif:namespaceBinding" minOccurs="0" maxOccurs="unbounded"/>
      <xs:element name="documentAlias" type="smlif:uriType" minOccurs="0" maxOccurs="unbounded"/>
      <xs:any namespace="##other" processContents="lax" minOccurs="0" maxOccurs="unbounded"/>

      <xs:element
            ref="smlif:namespaceBinding"
            minOccurs="0"
            maxOccurs="unbounded"/>
      <xs:element
            name="documentAlias"
            type="smlif:uriType"
            minOccurs="0"
            maxOccurs="unbounded"/>
      <xs:any
            namespace="##other"
            processContents="lax"
            minOccurs="0"
            maxOccurs="unbounded"/>

    </xs:sequence>
    <xs:anyAttribute namespace="##other" processContents="lax"/>
  </xs:complexType>
  <xs:element name="namespaceBinding" type="smlif:namespaceBindingType"/>

  <xs:element
        name="namespaceBinding"
        type="smlif:namespaceBindingType"/>

  
   <!-- The value of the aliases attribute in the complexType below 
       is a list of instance document URIs -->
   
  <xs:complexType name="namespaceBindingType" mixed="false">
    <xs:attribute name="namespace" type="xs:anyURI" use="optional"/>

    <xs:attribute
          name="namespace"
          type="xs:anyURI"
          use="optional"/>

    <xs:attribute name="aliases" use="required">
      <xs:simpleType>
        <xs:list itemType="xs:anyURI"/>
      </xs:simpleType>
    </xs:attribute>
    <xs:anyAttribute namespace="##other" processContents="lax"/>
  </xs:complexType>
  <xs:element name="noSchemaBinding" type="smlif:noSchemaBindingType"/>

  <xs:element
        name="noSchemaBinding"
        type="smlif:noSchemaBindingType"/>

  <xs:complexType name="noSchemaBindingType" mixed="false">
    <xs:sequence>
      <xs:element name="documentAlias" type="smlif:uriType" minOccurs="0" maxOccurs="unbounded"/>
      <xs:any namespace="##other" processContents="lax" minOccurs="0" maxOccurs="unbounded"/>

      <xs:element
            name="documentAlias"
            type="smlif:uriType"
            minOccurs="0"
            maxOccurs="unbounded"/>
      <xs:any
            namespace="##other"
            processContents="lax"
            minOccurs="0"
            maxOccurs="unbounded"/>

    </xs:sequence>
    <xs:anyAttribute namespace="##other" processContents="lax"/>
  </xs:complexType>
  <xs:element name="defaultSchema" type="smlif:defaultSchemaType"/>

  <xs:element
        name="defaultSchema"
        type="smlif:defaultSchemaType"/>

  <xs:complexType name="defaultSchemaType" mixed="false">
    <xs:sequence>
      <xs:element ref="smlif:namespaceBinding" minOccurs="0" maxOccurs="unbounded"/>
      <xs:any namespace="##other" processContents="lax" minOccurs="0" maxOccurs="unbounded"/>

      <xs:element
            ref="smlif:namespaceBinding"
            minOccurs="0"
            maxOccurs="unbounded"/>
      <xs:any
            namespace="##other"
            processContents="lax"
            minOccurs="0"
            maxOccurs="unbounded"/>

    </xs:sequence>
    <xs:anyAttribute namespace="##other" processContents="lax"/>
  </xs:complexType>
  <xs:complexType name="documentCollectionType" mixed="false">
    <xs:sequence>
      <xs:element ref="smlif:document" maxOccurs="unbounded"/>
      <xs:any namespace="##other" processContents="lax" minOccurs="0" maxOccurs="unbounded"/>

      <xs:any
            namespace="##other"
            processContents="lax"
            minOccurs="0"
            maxOccurs="unbounded"/>

    </xs:sequence>
    <xs:anyAttribute namespace="##other" processContents="lax"/>
  </xs:complexType>
  <xs:element name="document" type="smlif:documentType"/>
  <xs:complexType name="documentType" mixed="false">
    <xs:sequence>
      <xs:element ref="smlif:docinfo" minOccurs="0"/>
      <xs:choice>
        <xs:element name="data" type="smlif:dataType"/>
        <xs:element name="base64Data" type="smlif:base64DataType"/>

        <xs:element
              name="base64Data"
              type="smlif:base64DataType"/>

        <xs:element name="locator" type="smlif:locatorType"/>
      </xs:choice>
      <xs:any namespace="##other" processContents="lax" minOccurs="0" maxOccurs="unbounded"/>

      <xs:any
            namespace="##other"
            processContents="lax"
            minOccurs="0"
            maxOccurs="unbounded"/>

    </xs:sequence>
    <xs:anyAttribute namespace="##other" processContents="lax"/>
  </xs:complexType>
  <xs:element name="docinfo" type="smlif:docinfoType"/>
  <xs:complexType name="docinfoType" mixed="false">
    <xs:sequence>
      <xs:element name="baseURI" type="smlif:uriType" minOccurs="0"/>

      <xs:element
            name="baseURI"
            type="smlif:uriType"
            minOccurs="0"/>

      <xs:element ref="smlif:aliases" minOccurs="0"/>
      <xs:any namespace="##other" processContents="lax" minOccurs="0" maxOccurs="unbounded"/>

      <xs:any
            namespace="##other"
            processContents="lax"
            minOccurs="0"
            maxOccurs="unbounded"/>

    </xs:sequence>
    <xs:anyAttribute namespace="##other" processContents="lax"/>
  </xs:complexType>
  <xs:element name="aliases" type="smlif:aliasCollectionType"/>
  <xs:complexType name="aliasCollectionType" mixed="false">
    <xs:sequence>
      <xs:element name="alias" type="smlif:uriType" minOccurs="0" maxOccurs="unbounded"/>
      <xs:any namespace="##other" processContents="lax" minOccurs="0" maxOccurs="unbounded"/>

      <xs:element
            name="alias"
            type="smlif:uriType"
            minOccurs="0"
            maxOccurs="unbounded"/>
      <xs:any
            namespace="##other"
            processContents="lax"
            minOccurs="0"
            maxOccurs="unbounded"/>

    </xs:sequence>
    <xs:anyAttribute namespace="##other" processContents="lax"/>
  </xs:complexType>
  <xs:complexType name="dataType" mixed="false">
    <xs:annotation>
      <xs:documentation>
                The wildcard with processContents "skip" matches the root element of the  
                model document being packaged. The value of processContents is set to "skip" so
                that the contained element is not processed for schema validation. As a result,
                validity of the packaged document will not affect validity of the IF document
                itself.
            </xs:documentation>
    </xs:annotation>
    <xs:sequence>
      <xs:any processContents="skip" minOccurs="0" namespace="##any" maxOccurs="1"/>
    </xs:sequence>
    <xs:anyAttribute namespace="##other" processContents="lax"/>
  </xs:complexType>
  <xs:complexType name="base64DataType" mixed="false">
    <xs:simpleContent>
      <xs:extension base="xs:base64Binary">
        <xs:anyAttribute namespace="##other" processContents="lax"/>
      </xs:extension>
    </xs:simpleContent>
  </xs:complexType>
  <xs:complexType name="locatorType" mixed="false">
    <xs:sequence>
      <xs:element name="documentURI" type="smlif:uriType" minOccurs="0"/>
      <xs:any namespace="##other" processContents="lax" minOccurs="0" maxOccurs="unbounded"/>

      <xs:any
            processContents="skip"
            minOccurs="0"
            namespace="##any"
            maxOccurs="1"/>

    </xs:sequence>
    <xs:anyAttribute namespace="##other" processContents="lax"/>
  </xs:complexType>
</xs:schema>
B.
Localization
of
IF
Identity
Sample
(Non-Normative)
The
following
example
shows
how
the
sml:locid
attribute
can
be
used
to
define
the
translation
information
for
the
interchange
model identity attributes:
<model xmlns="http://www.w3.org/ns/sml-if" version="1.0"
       xmlns:sml="http://www.w3.org/ns/sml">
       xmlns:lang="http://www.university.example.org/translation/core">
    <identity>
        <name sml:locid="lang:nameID">Univerity interchange model</name>
        <description sml:locid="lang:descrID"> This document contains a list of universities.</description>
    </identity>
</model>
In
this
example,
the
[namespace
name]
URI
information
of
the
sml:locid
attribute
can
be
used
to
define
the
location
for
the
resource
containing
the
translated
text.
The
smlif:name
and
smlif:description
elements
are
using
the
same
URI
to
identify
the
resource
containing
the
translated
strings:
<xmlns:lang="http://www.university.example.org/translation/core">
The
[local
part]
information
of
the
sml:locid
attribute
can
be
used
to
define
the
id
of
the
text
being
translated.
This
information
will
be
used
to
locate
the
translation
of
the
name
and
description
texts
within
the
translation
resource.
C.
Acknowledgements
(Non-Normative)
The
editors
acknowledge
the
members
of
the
Service
Modeling
Language
Working
Group,
the
members
of
other
W3C
Working
Groups,
and
industry
experts
in
other
forums
who
have
contributed
directly
or
indirectly
to
the
process
or
content
of
creating
this
document.
At
the
time
this
specification
was
published,
the
members
of
the
Service
Modeling
Language
Working
Group
were:
John
Arwe
(IBM
Corporation),
Len
Charest
(Microsoft
Corporation),
Sandy
Gao
(IBM
Corporation),
Paul
Lipton
(CA),
James
Lynn
(HP),

  </xs:complex