Annotation of libwww/Library/src/HTAccess.html, revision 2.21
2.9 timbl 1: <HTML>
2: <HEAD>
2.6 timbl 3: <TITLE>HTAccess: Access manager for libwww</TITLE>
2.19 timbl 4: <NEXTID N="z11">
2.9 timbl 5: </HEAD>
2.5 timbl 6: <BODY>
7: <H1>Access Manager</H1>This module keeps a list of valid
8: protocol (naming scheme) specifiers
9: with associated access code. It
10: allows documents to be loaded given
11: various combinations of parameters.
12: New access protocols may be registered
13: at any time.<P>
2.9 timbl 14: Note: HTRequest defined and request
15: parametsr added to almost all calls
16: 18 Nov 1993.<P>
2.5 timbl 17: Part of the <A
2.19 timbl 18: NAME="z0" HREF="Overview.html">libwww library</A> . Implemented
19: by <A
20: NAME="z8" HREF="HTAccess.c">HTAcces.c</A>
2.5 timbl 21: <PRE>#ifndef HTACCESS_H
1.1 timbl 22: #define HTACCESS_H
23:
24: /* Definition uses:
25: */
26: #include "HTUtils.h"
2.16 luotonen 27: #include "HTList.h"
1.1 timbl 28: #include "tcp.h"
2.14 luotonen 29:
1.1 timbl 30:
31: #ifdef SHORT_NAMES
2.8 timbl 32: #define HTClientHost HTClHost
33: #define HTSearchAbsolute HTSeAbso
34: #define HTOutputStream HTOuStre
35: #define HTOutputFormat HTOuForm
1.1 timbl 36: #endif
37:
2.16 luotonen 38: typedef enum {
39: METHOD_INVALID = 0,
40: METHOD_GET = 1,
41: METHOD_HEAD,
42: METHOD_POST,
43: METHOD_PUT,
44: METHOD_DELETE,
45: METHOD_CHECKOUT,
46: METHOD_CHECKIN,
47: METHOD_SHOWMETHOD,
48: METHOD_LINK,
49: METHOD_UNLINK,
50: MAX_METHODS
51: } HTMethod;
52:
53:
54: </PRE>
55: <H2>Methods</H2>
56: <PRE>
57:
58: /* Get method enum value
59: ** ---------------------
60: */
61: PUBLIC HTMethod HTMethod_enum PARAMS((char * name));
62:
63:
64: /* Get method name
65: ** ---------------
66: */
67: PUBLIC char * HTMethod_name PARAMS((HTMethod method));
68:
69:
70: /* PUBLIC HTMethod_inList()
71: ** IS A METHOD IN A LIST OF METHOD NAMES
72: ** ON ENTRY:
73: ** method is the method to look for.
74: ** list is a list of method names.
75: **
76: ** ON EXIT:
77: ** returns YES, if method was found.
78: ** NO, if not found.
79: */
80: PUBLIC BOOL HTMethod_inList PARAMS((HTMethod method,
81: HTList * list));
82: </PRE>
83: <H2>Match Template Against Filename</H2>
84: <PRE>
85: /* PUBLIC HTAA_templateMatch()
86: ** STRING COMPARISON FUNCTION FOR FILE NAMES
87: ** WITH ONE WILDCARD * IN THE TEMPLATE
88: ** NOTE:
89: ** This is essentially the same code as in HTRules.c, but it
90: ** cannot be used because it is embedded in between other code.
91: ** (In fact, HTRules.c should use this routine, but then this
92: ** routine would have to be more sophisticated... why is life
93: ** sometimes so hard...)
94: **
95: ** ON ENTRY:
96: ** template is a template string to match the file name
97: ** agaist, may contain a single wildcard
98: ** character * which matches zero or more
99: ** arbitrary characters.
100: ** filename is the filename (or pathname) to be matched
101: ** agaist the template.
102: **
103: ** ON EXIT:
104: ** returns YES, if filename matches the template.
105: ** NO, otherwise.
106: */
107: PUBLIC BOOL HTAA_templateMatch PARAMS((CONST char * template,
108: CONST char * filename));
109:
110:
2.19 timbl 111: </PRE>The following have to be defined
2.10 timbl 112: in advance of the other include files
113: because of circular references.
114: <PRE>typedef struct _HTRequest HTRequest;
115:
2.14 luotonen 116: /*
117: ** Callback to call when username and password
118: ** have been prompted.
119: */
120: typedef int (*HTRetryCallbackType) PARAMS((HTRequest * req));
121:
122:
2.10 timbl 123: #include "HTAnchor.h"
124: #include <A
125: NAME="z3" HREF="HTFormat.html">"HTFormat.h"</A>
2.15 luotonen 126: #include "HTAAUtil.h" /* HTAAScheme, HTAAFailReason */
2.14 luotonen 127: #include "HTAABrow.h" /* HTAASetup */
2.10 timbl 128:
129:
1.1 timbl 130: /* Return codes from load routines:
131: **
132: ** These codes may be returned by the protocol modules,
133: ** and by the HTLoad routines.
134: ** In general, positive codes are OK and negative ones are bad.
135: */
136:
137: #define HT_NO_DATA -9999 /* return code: OK but no data was loaded */
138: /* Typically, other app started or forked */
139:
2.5 timbl 140: </PRE>
2.6 timbl 141: <H2>Default Addresses</H2>These control the home page selection.
2.8 timbl 142: To mess with these for normal browses
2.6 timbl 143: is asking for user confusion.
144: <PRE>#define LOGICAL_DEFAULT "WWW_HOME" /* Defined to be the home page */
1.1 timbl 145:
2.6 timbl 146: #ifndef PERSONAL_DEFAULT
147: #define PERSONAL_DEFAULT "WWW/default.html" /* in home directory */
148: #endif
149: #ifndef LOCAL_DEFAULT_FILE
1.1 timbl 150: #define LOCAL_DEFAULT_FILE "/usr/local/lib/WWW/default.html"
2.6 timbl 151: #endif
2.7 timbl 152: /* If one telnets to a www access point,
153: it will look in this file for home page */
154: #ifndef REMOTE_POINTER
155: #define REMOTE_POINTER "/etc/www-remote.url" /* can't be file */
156: #endif
157: /* and if that fails it will use this. */
2.6 timbl 158: #ifndef REMOTE_ADDRESS
1.1 timbl 159: #define REMOTE_ADDRESS "http://info.cern.ch/remote.html" /* can't be file */
160: #endif
161:
162: /* If run from telnet daemon and no -l specified, use this file:
163: */
164: #ifndef DEFAULT_LOGFILE
165: #define DEFAULT_LOGFILE "/usr/adm/www-log/www-log"
166: #endif
167:
168: /* If the home page isn't found, use this file:
169: */
170: #ifndef LAST_RESORT
2.6 timbl 171: #define LAST_RESORT "http://info.cern.ch/default.html"
1.1 timbl 172: #endif
173:
2.10 timbl 174:
2.9 timbl 175: </PRE>
176: <H2><A
177: NAME="z1">The Request structure</A></H2>When a request is handled, all kinds
178: of things about it need to be passed
179: along. These are all put into a
2.11 timbl 180: HTRequest structure. Note there
181: is also a <A
2.12 timbl 182: NAME="z4" HREF="HTFormat.html#z17">global list of converters</A>
183: .
2.10 timbl 184: <PRE>struct _HTRequest {
2.19 timbl 185:
186: </PRE>The elements of the request structure
187: are as follows.
188: <H3>Set by the caller of HTaccess:</H3>
189: <H4>Conditions of the request itself:</H4>
190: <PRE> HTMethod method;
191:
192: </PRE>An atom for the name of the operation
193: using HTTP <A
194: NAME="z7" HREF="../../Protocols/HTTP/Methods.html">method names</A> .
195: <PRE> HTList * conversions ;
2.20 frystyk 196: </PRE>NULL, or a list of conversions which
2.19 timbl 197: the format manager can do in order
198: to fulfill the request. This is
199: set by the caller of HTAccess. Typically
200: points to a list set up an initialisation
201: time for example by HTInit.
202: <PRE> HTList * encodings; /* allowed content-encodings */
203:
204: </PRE>The list of encodings acceptablein
205: the output stream.
206: <PRE> HTList * languages; /* accepted content-languages */
207:
208: </PRE>The list of (human) language values
209: acceptable in the response
210: <PRE> BOOL (*<A
2.20 frystyk 211: NAME="z9"> callback</A> ) PARAMS((
2.9 timbl 212: struct _HTRequest* request,
213: void *param));
2.19 timbl 214:
215: </PRE>A function to be called back in the
216: event that a file has been saved
217: to disk by HTSaveAndCallBack for
218: example.
219: <PRE> void * context; /* caller data -- HTAccess unaware */
220:
221: </PRE>An arbitrary pointer passed to HTAccess
222: and passed back as a parameter to
223: the <A
2.20 frystyk 224: NAME="z10" HREF="#z9">callback</A> .
2.19 timbl 225: <PRE> HTStream* output_stream;
226:
227: </PRE>NULL in the case of display to the
228: user, or if a specific output stream
229: is required, the stream.
230: <PRE> HTAtom * output_format;
231:
232: </PRE>The output format required, or a
233: generic format such as www/present
234: (present to user).
235: <H4>Information about the requester</H4>
236: <PRE> char * from;
237:
238: </PRE>Email format address of person responible
239: for request
240: <H3>Set by HTAccess</H3>None of the bits below may be looked
241: at by a client application except
242: in the callback routine, when the
243: anchor may be picked out.
244: <PRE> HTParentAnchor* anchor;
245:
246: </PRE>The anchor for the object in question.
2.20 frystyk 247: Set immediately by HTAcesss. Used
2.19 timbl 248: by the protocol and parsing modules.
249: Valid thoughout the access.
250: <PRE> HTChildAnchor * childAnchor; /* For element within the object */
251:
252: </PRE><A
2.20 frystyk 253: NAME="z6">T</A> he anchor for the sub object if
2.19 timbl 254: any. The object builder should ensure
255: that htis is selected, highlighted,
256: etc when the object is loaded. NOTE:
257: Set by HTAccess.
258: <PRE> void * using_cache;
259:
260: </PRE>pointer to cache element if cache
261: hit
2.21 ! luotonen 262: <H3>Server Side</H3>
! 263: <PRE>
! 264: HTAtom * content_type; /* Content-Type: */
2.18 luotonen 265: HTAtom * content_language;/* Language */
266: HTAtom * content_encoding;/* Encoding */
2.16 luotonen 267: int content_length; /* Content-Length: */
2.21 ! luotonen 268: HTInputSocket * isoc; /* InputSocket object for reading */
2.14 luotonen 269: char * authorization; /* Authorization: field */
270: HTAAScheme scheme; /* Authentication scheme used */
2.19 timbl 271: </PRE>
2.21 ! luotonen 272: <H3>Client Side</H3>
2.19 timbl 273: <PRE>
2.14 luotonen 274: HTList * valid_schemes; /* Valid auth.schemes */
275: HTAssocList ** scheme_specifics;/* Scheme-specific parameters */
276: char * prot_template; /* WWW-Protection-Template: field */
277: HTAASetup * setup; /* Doc protection info */
278: HTAARealm * realm; /* Password realm */
279: char * dialog_msg; /* Authentication prompt (client) */
280: HTRetryCallbackType
281: retry_callback; /* Called when password entered */
2.10 timbl 282: };
2.9 timbl 283:
2.19 timbl 284: </PRE>Just to make things easier especially
2.9 timbl 285: for clients, here is a function to
286: return a new blank request:
287: <H2>Create blank request</H2>This request has defaults in -- in
288: most cases it will need some information
289: added before being passed to HTAccess,
290: but it will work as is for a simple
291: request.
2.14 luotonen 292: <PRE>
293: PUBLIC HTRequest * HTRequest_new NOPARAMS;
294:
295:
296: </PRE>
2.19 timbl 297: <H2>Delete request structure</H2>Frees also conversion list hanging
298: from req->conversions.
2.14 luotonen 299: <PRE>
300: PUBLIC void HTRequest_delete PARAMS((HTRequest * req));
1.1 timbl 301:
2.9 timbl 302:
2.5 timbl 303: </PRE>
304: <H2>Flags which may be set to control
305: this module</H2>
306: <PRE>extern int HTDiag; /* Flag: load source as plain text */
1.1 timbl 307: extern char * HTClientHost; /* Name or number of telnetting host */
308: extern FILE * logfile; /* File to output one-liners to */
2.7 timbl 309: extern BOOL HTSecure; /* Disable security holes? */
2.21 ! luotonen 310: extern BOOL HTImServer; /* If I'm cern_httpd */
! 311: extern BOOL HTImProxy; /* If I'm cern_httpd as a proxy */
1.1 timbl 312:
313:
2.5 timbl 314: </PRE>
315: <H2>Load a document from relative name</H2>
316: <H3>On Entry,</H3>
317: <DL>
318: <DT>relative_name
2.6 timbl 319: <DD> The relative address
2.5 timbl 320: of the file to be accessed.
321: <DT>here
2.6 timbl 322: <DD> The anchor of the object being
2.5 timbl 323: searched
2.9 timbl 324: <DT>request->anchor
325: <DD> not filled in yet
2.5 timbl 326: </DL>
327:
328: <H3>On Exit,</H3>
329: <DL>
330: <DT>returns YES
2.6 timbl 331: <DD> Success in opening
2.5 timbl 332: file
333: <DT>NO
2.6 timbl 334: <DD> Failure
2.5 timbl 335: </DL>
1.1 timbl 336:
2.5 timbl 337: <PRE>extern BOOL HTLoadRelative PARAMS((
1.1 timbl 338: CONST char * relative_name,
2.9 timbl 339: HTParentAnchor * here,
340: HTRequest * request));
1.1 timbl 341:
342:
2.5 timbl 343: </PRE>
344: <H2>Load a document from absolute name</H2>
345: <H3>On Entry,</H3>
346: <DL>
347: <DT>addr
2.6 timbl 348: <DD> The absolute address of the
349: document to be accessed.
2.5 timbl 350: <DT>filter
2.6 timbl 351: <DD> if YES, treat document as
352: HTML
2.9 timbl 353: <DT>request->anchor
354: <DD> not filled in yet
2.5 timbl 355: </DL>
1.1 timbl 356:
2.5 timbl 357: <PRE>
358: </PRE>
359: <H3>On Exit,</H3>
360: <PRE>
361: </PRE>
362: <DL>
363: <DT>returns YES
2.6 timbl 364: <DD> Success in opening document
2.5 timbl 365: <DT>NO
2.6 timbl 366: <DD> Failure
2.5 timbl 367: </DL>
1.1 timbl 368:
2.9 timbl 369: <PRE>extern BOOL HTLoadAbsolute PARAMS((CONST char * addr,
370: HTRequest * request));
1.1 timbl 371:
372:
2.5 timbl 373: </PRE>
374: <H2>Load a document from absolute name
375: to a stream</H2>
376: <H3>On Entry,</H3>
377: <DL>
378: <DT>addr
2.6 timbl 379: <DD> The absolute address of the
380: document to be accessed.
2.5 timbl 381: <DT>filter
2.6 timbl 382: <DD> if YES, treat document as
383: HTML
2.9 timbl 384: <DT>request->anchor
385: <DD> not filled in yet
2.5 timbl 386: </DL>
387:
388: <H3>On Exit,</H3>
389: <DL>
390: <DT>returns YES
2.6 timbl 391: <DD> Success in opening document
2.5 timbl 392: <DT>NO
2.6 timbl 393: <DD> Failure
2.5 timbl 394: </DL>
395: Note: This is equivalent to HTLoadDocument
2.9 timbl 396: <PRE>extern BOOL HTLoadToStream PARAMS((
397: CONST char * addr,
398: BOOL filter,
399: HTRequest * request));
1.1 timbl 400:
401:
2.5 timbl 402: </PRE>
403: <H2>Load if necessary, and select an
2.9 timbl 404: anchor</H2>The anchor parameter may be a child
405: anchor. The anchor in the request
406: is set to the parent anchor.
2.5 timbl 407: <H3>On Entry,</H3>
408: <DL>
2.9 timbl 409: <DT>anchor
410: <DD> may be a child or parenet
411: anchor or 0 in which case there is
412: no effect.
413: <DT>request->anchor
414: <DD> Not set
415: yet.
2.5 timbl 416: </DL>
417:
418: <H3>On Exit,</H3>
419: <PRE>
420: </PRE>
421: <DL>
422: <DT>returns YES
2.6 timbl 423: <DD> Success
2.5 timbl 424: <DT>returns NO
2.6 timbl 425: <DD> Failure
2.9 timbl 426: <DT>request->anchor
427: <DD> The parenet anchor.
2.5 timbl 428: </DL>
429:
2.9 timbl 430: <PRE>extern BOOL HTLoadAnchor PARAMS((HTAnchor * a,
431: HTRequest * request));
1.1 timbl 432:
433:
2.5 timbl 434: </PRE>
2.20 frystyk 435: <H2>Bind an anchor to a request structure
436: without loading</H2>The anchor parameter may be a child
437: anchor. The anchor in the request
438: is set to the parent anchor. This
439: is useful in non-interactive mode
440: if no home-anchor is known. Actually
441: the same as HTLoadAnchor(), but without
442: loading
443: <H3>On Entry,</H3>
444: <DL>
445: <DT>anchor
446: <DD> may be a child or parenet
447: anchor or 0 in which case there is
448: no effect.
449: <DT>request->anchor
450: <DD> Not set yet.
451: </DL>
452:
453: <H3>On Exit,</H3>
454: <PRE>
455: </PRE>returns YES Success<P>
456: returns NO Failure <P>
457: request->anchor The parenet anchor.
458: <PRE>
459: extern BOOL HTBindAnchor PARAMS((HTAnchor *anchor, HTRequest *request));
460:
461:
462: </PRE>
2.5 timbl 463: <H2>Make a stream for Saving object back</H2>
464: <H3>On Entry,</H3>
465: <DL>
2.9 timbl 466: <DT>request->anchor
467: <DD> is valid anchor which
468: has previously beeing loaded
2.5 timbl 469: </DL>
470:
471: <H3>On exit,</H3>
472: <DL>
473: <DT>returns
2.6 timbl 474: <DD> 0 if error else a stream
475: to save the object to.
2.5 timbl 476: </DL>
477:
478: <PRE>
479:
2.13 timbl 480: extern HTStream * HTSaveStream PARAMS((HTRequest * request));
1.1 timbl 481:
482:
2.5 timbl 483: </PRE>
484: <H2>Search</H2>Performs a search on word given by
485: the user. Adds the search words to
486: the end of the current address and
487: attempts to open the new address.
488: <H3>On Entry,</H3>
489: <DL>
490: <DT>*keywords
2.6 timbl 491: <DD> space-separated keyword
2.5 timbl 492: list or similar search list
493: <DT>here
2.6 timbl 494: <DD> The anchor of the object being
2.5 timbl 495: searched
496: </DL>
1.1 timbl 497:
2.9 timbl 498: <PRE>extern BOOL HTSearch PARAMS((
499: CONST char * keywords,
500: HTParentAnchor* here,
501: HTRequest * request));
1.1 timbl 502:
503:
2.5 timbl 504: </PRE>
505: <H2>Search Given Indexname</H2>Performs a keyword search on word
506: given by the user. Adds the keyword
507: to the end of the current address
508: and attempts to open the new address.
509: <H3>On Entry,</H3>
510: <DL>
511: <DT>*keywords
2.6 timbl 512: <DD> space-separated keyword
2.5 timbl 513: list or similar search list
514: <DT>*indexname
2.6 timbl 515: <DD> is name of object search
2.5 timbl 516: is to be done on.
517: </DL>
1.1 timbl 518:
2.5 timbl 519: <PRE>extern BOOL HTSearchAbsolute PARAMS((
2.9 timbl 520: CONST char * keywords,
521: CONST char * indexname,
522: HTRequest * request));
1.1 timbl 523:
524:
2.5 timbl 525: </PRE>
2.9 timbl 526: <H2>Register an access method</H2>An access method is defined by an
527: HTProtocol structure which point
528: to the routines for performing the
529: various logical operations on an
530: object: in HTTP terms, GET, PUT,
531: and POST.<P>
532: Each of these routine takes as a
533: parameter a <A
534: NAME="z2" HREF="#z1">request structure</A> containing
535: details ofthe request. When the
536: protocol class routine is called,
537: the anchor elemnt in the request
538: is already valid (made valid by HTAccess).
539: <PRE>typedef struct _HTProtocol {
1.1 timbl 540: char * name;
541:
2.11 timbl 542: int (*load)PARAMS((HTRequest * request));
1.1 timbl 543:
2.11 timbl 544: HTStream* (*saveStream)PARAMS((HTRequest * request));
545:
2.9 timbl 546: HTStream* (*postStream)PARAMS((
547: HTRequest * request,
548: HTParentAnchor* postTo));
1.1 timbl 549:
550: } HTProtocol;
551:
552: extern BOOL HTRegisterProtocol PARAMS((HTProtocol * protocol));
553:
554:
2.5 timbl 555: </PRE>
556: <H2>Generate the anchor for the home
557: page</H2>
558: <PRE>
559: </PRE>As it involves file access, this
560: should only be done once when the
561: program first runs. This is a default
562: algorithm -- browser don't HAVE to
563: use this.
564: <PRE>extern HTParentAnchor * HTHomeAnchor NOPARAMS;
1.1 timbl 565:
566: #endif /* HTACCESS_H */
2.11 timbl 567:
2.20 frystyk 568: </PRE>end of HTAccess</BODY>
2.9 timbl 569: </HTML>
Webmaster