illustrates a security policy expression using assertions defined in WS-SecurityPolicy []:

Lines (03-06) represent one policy alternative for signing a message body.

Lines (08-11) represent a second policy alternative for encrypting a message body.

Lines (02-13) illustrate the ExactlyOne policy operator. Policy operators group policy assertions into policy alternatives. A valid interpretation of the policy above would be that an invocation of a Web service will either sign or encrypt the message body.

This specification uses the following syntax within normative outlines:

Elements and Attributes defined by this specification are referred to in the text of this document using XPath 1.0 [XPATH 1.0] expressions. Extensibility points are referred to using an extended version of this syntax:

Normative text within this specification takes precedence over normative outlines, which in turn take precedence over the XML Schema [] descriptions.

Within normative outlines, in this specification, ellipses (i.e., "…") indicate a point of extensibility that allows other Element or Attribute Information Items. Information Items MAY be added at the indicated extension points but MUST NOT contradict the semantics of the element information item indicated by the parent or owner property of the extension. In this context, if an Attribute Information Item is not recognized, it SHOULD be ignored. If an Element Information Item is not recognized, it MUST be treated as a policy assertion, unless specified otherwise such as in Section .

This specification uses a number of namespace prefixes throughout; they are listed in . Note that the choice of any namespace prefix is arbitrary and not semantically significant (see []).

All information items defined by this specification are identified by the XML namespace URI [] http://www.w3.org/ns/ws-policy. A normative XML Schema [, ] document can be obtained indirectly by dereferencing the namespace document at the WS-Policy 1.5 namespace URI.

It is the intent of the W3C Web Services Policy Working Group that the Web Services Policy 1.5 - Framework and Web Services Policy 1.5 - Attachment XML namespace URI will not change arbitrarily with each subsequent revision of the corresponding XML Schema documents as the specifications transition through Candidate Recommendation, Proposed Recommendation and Recommendation status. However, should the specifications revert to Working Draft status, and a subsequent revision, published as a WD, CR or PR draft, results in non-backwardly compatible changes from a previously published WD, CR or PR draft of the specification, the namespace URI will be changed accordingly.

Under this policy, the following are examples of backwards compatible changes that would not result in assignment of a new XML namespace URI:

The keywords "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [].

We introduce the following terms that are used throughout this document:

A policy assertion represents a requirement, a capability, or other property of a behavior. A policy assertion identifies a behavior that is a requirement or capability of a policy subject. A policy subject is an entity (e.g., an endpoint, message, resource, operation) with which a policy can be associated. Assertions indicate domain-specific (e.g., security, transactions) semantics and are expected to be defined in separate, domain-specific specifications.

An assertion MAY indicate that it is an ignorable policy assertion (see ). An ignorable policy assertion is an assertion that may be ignored for policy intersection (as defined in 4.5 Policy Intersection). By default, an assertion is not ignorable for policy intersection.

Assertions are typed by the authors that define them. A policy assertion type represents a class of policy assertions and implies a schema for the assertion and assertion-specific semantics. The policy assertion type is identified only by the XML Infoset namespace name and local name properties (that is, the qualified name or QName) of the root Element Information Item representing the assertion. Assertions of a given type MUST be consistently interpreted independent of their policy subjects.

Authors MAY define that an assertion contains a policy expression (as defined in ) as one of its children. Nested policy expression(s) are used by authors to further qualify one or more specific aspects of the original assertion. For example, security policy authors may define an assertion describing a set of security algorithms to qualify the specific behavior of a security binding assertion.

The XML Infoset of a policy assertion MAY contain a non-empty attributes property and/or a non-empty children property. Such properties, excluding the Attribute and Element Information Items from the WS-Policy language XML namespace name are policy assertion parameters and MAY be used to parameterize the behavior indicated by the assertion. A policy assertion parameter qualifies the behavior indicated by a policy assertion. For example, an assertion identifying support for a specific reliable messaging mechanism might include an attribute information item to indicate how long an endpoint will wait before sending an acknowledgement.

Authors should be cognizant of the processing requirements when defining complex assertions containing policy assertion parameters or nested policy expressions. Specifically, authors are encouraged to consider when the identity of the root Element Information Item alone is enough to convey the requirement or capability.

A policy alternative is a potentially empty collection of policy assertions. An alternative with zero assertions indicates no behaviors. An alternative with one or more assertions indicates behaviors implied by those, and only those assertions. A policy vocabulary is the set of all policy assertion types used in a policy. A policy alternative vocabulary is the set of all policy assertion types within the policy alternative. When an assertion whose type is part of the policy's vocabulary is not included in a policy alternative, the policy alternative without the assertion type indicates that the assertion will not be applied in the context of the attached policy subject. See the example in Section

Assertions within an alternative are not ordered, and thus aspects such as the order in which behaviors (indicated by assertions) are applied to a subject are beyond the scope of this specification. However, authors can write assertions that control the order in which behaviours are applied.

A policy alternative MAY contain multiple assertions of the same type. Mechanisms for determining the aggregate behavior indicated by the assertions (and their Post-Schema-Validation Infoset (PSVI) (See XML Schema Part 1 []) content, if any) are specific to the assertion type and are outside the scope of this document.

Note: Depending on the semantics of the domain specific policy assertions a combination of the policy assertions can be required to specify a particular behavior.

A policy is a potentially empty collection of policy alternatives. A policy with zero alternatives contains no choices; a policy with one or more alternatives indicates choice in requirements or capabilities within the policy.

Alternatives are not ordered, and thus aspects such as preferences between alternatives in a given context are beyond the scope of this specification.

Alternatives within a policy may differ significantly in terms of the behaviors they indicate. Conversely, alternatives within a policy may be very similar. In either case, the value or suitability of an alternative is generally a function of the semantics of assertions within the alternative and is therefore beyond the scope of this specification.

Applied to a Web services based system, policy is used to convey conditions on an interaction between entities (requester application, provider service, Web infrastructure component, etc). An interaction involves one or more message exchanges between two entities. It is the responsibility of assertion authors to define the interaction scope of an assertion including any constraints on the policy subjects to which the assertion may be attached and a clear specification of the message (s) within that interaction scope to which the assertion applies.

Any entity in a Web services based system may expose a policy to convey conditions under which it functions. Satisfying assertions in the policy usually results in behavior that reflects these conditions. For example, if two entities - requester and provider - expose their policies, a requester might use the policy of the provider to decide whether or not to use the service. A requester MAY choose any alternative since each is a valid configuration for interaction with the service, but a requester MUST choose only a single alternative for an interaction with a service since each represents an alternative configuration.

A policy assertion is supported by an entity in the web services based system if and only if the entity satisfies the requirement (or accommodates the capability) corresponding to the assertion. A policy alternative is supported by an entity if and only if the entity supports all the assertions in the alternative. And, a policy is supported by an entity if and only if the entity supports at least one of the alternatives in the policy. Note that although policy alternatives are meant to be mutually exclusive, it cannot be decided in general whether or not more than one alternative can be supported at the same time.

Note that an entity may be able to support a policy even if the entity does not understand the type of each assertion in the vocabulary of the policy; the entity only has to understand the type of each assertion in the vocabulary of a policy alternative the entity supports. This characteristic is crucial to versioning and incremental deployment of new assertions because this allows a provider's policy to include new assertions in new alternatives while allowing entities to continue to use old alternatives in a backward-compatible manner.

To facilitate interoperability, this specification defines a normal form for policy expressions that is a straightforward XML Infoset representation of a policy, enumerating each of its alternatives that in turn enumerate each of their assertions. The schema outline for the normal form of a policy expression is as follows:

The following describes the Element Information Items defined in the schema outline above:

If an assertion in the normal form of a policy expression contains a nested policy expression, the nested policy expression MUST contain at most one policy alternative (see ).

To simplify processing and improve interoperability, the normal form of a policy expression SHOULD be used where practical.

For example, the following is the normal form of a policy expression.

Lines (03-07) and Lines (08-11) express the two alternatives in the policy. If the first alternative is selected, the message body needs to be signed [] is supported; conversely, if the second alternative is selected, the message body needs to be encrypted.

A policy expression MAY be associated with an IRI []. The schema outline for attributes to associate an IRI is as follows:

The following describes the Attribute Information Items listed and defined in the schema outline above:

The following example illustrates how to associate a policy expression with the absolute IRI "http://www.example.com/policies/P1":

The following example illustrates how to associate a policy expression with the IRI-reference "#P1":

To express a policy in a more compact form while still using the XML Infoset, this specification defines three constructs: an attribute to decorate an assertion, semantics for recursively nested policy operators, and a policy reference/inclusion mechanism. Each sub section below describes a construct and its equivalent normal form. To interpret a compact expression in an interoperable form, a policy expression in the compact form can be converted (see Section ) to the normal form (see Section ).

A policy expression consists of a wsp:Policy wrapper element and zero or more child and descendent elements.

The wsp:Ignorable attribute indicates if a policy assertion is an ignorable policy assertion. The schema outline for this attribute is as follows:

The following describes the Attribute Information Item defined in the schema outline above:

Policy intersection is useful when two or more parties express policy and want to limit the policy alternatives to those that are mutually compatible. For example, when a requester and a provider express requirements on a message exchange, intersection identifies compatible policy alternatives (if any) included in both requester and provider policies. Intersection is a commutative function that takes two policies and returns a policy. There are two modes for intersection: strict and lax. How the mode is selected or indicated for the policy intersection is outside the scope of this specification.

Because the set of behaviors indicated by a policy alternative depends on the domain-specific semantics of the collected assertions, determining whether two policy alternatives are compatible generally involves domain-specific processing. If a domain-specific intersection processing algorithm is required this will be known from the QNames of the specific assertion types involved in the policy alternatives. As a first approximation, an algorithm is defined herein that approximates compatibility in a domain-independent manner:

Assertion parameters are not part of the compatibility determination defined herein but may be part of other, domain-specific compatibility processing.

If the mode is lax, two policy alternatives A and B are compatible:

if each assertion in A that is not an ignorable policy assertion is compatible with an assertion in B, and

If two alternatives are compatible, their intersection is an alternative containing all of the assertions in both alternatives.

See Section for mechanisms for determining the aggregate behavior indicated by multiple assertions of the same policy assertion type.

As an example of intersection, consider two input policies in normal form:

The listing above contains two policy alternatives. The first alternative, (Lines 03-10) contains two policy assertions. One indicates which elements should be signed (Lines 04-06); its type is sp:SignedElements (Line 04), and its parameters include an XPath expression for the content to be signed (Line 05). The other assertion (Lines 07-09) has a similar structure: type (Line 07) and parameters (Line 08).

The second alternative (Lines 11-19) also contains two assertions, each with type (Line 12 and Line 16) and parameters (Lines 13-14 and Line 17).

As this example illustrates, compatibility between two policy assertions is based on assertion type and delegates parameter processing to domain-specific processing.

Because there is only one alternative (A2) in policy P1 with the same vocabulary — the assertions have the same type — as another alternative (A3) in policy P2, the intersection is a policy with a single alternative that contains all of the assertions in A2 and in A3.

Note that there are > 1 assertions of the type sp:SignedParts; when the behavior associated with sp:SignedParts is invoked, the contents of both assertions are used to indicate the correct behavior. Whether these two assertions are compatible depends on the domain-specific semantics of the sp:SignedParts assertion. To leverage intersection, assertion authors are encouraged to factor assertions such that two assertions of the same assertion type are always (or at least typically) compatible.

Policy expressions use IRIs for some identifiers. This document does not define a base URI but relies on the mechanisms defined in XML Base [] and RFCs 3023 [], 3986 [] and 3987 [] for establishing a base URI against which relative IRIs can be made absolute.

A policy is used to represent the capabilities and requirements of a Web Service. Policies may include sensitive information. Malicious consumers may acquire sensitive information, fingerprint the service and infer service vulnerabilities. These threats can be mitigated by requiring authentication for sensitive information, by omitting sensitive information from the policy or by securing access to the policy. For securing access to policy metadata, policy providers can use mechanisms from other Web Services specifications such as WS-Security [] and WS-MetadataExchange [] .

If a policy expression is unsigned it could be easily tampered with or replaced. To prevent tampering or spoofing of policy, requestors should discard a policy unless it is signed by the provider and presented with sufficient credentials. Requestors should also check that the signer is actually authorized to express policies for the given policy subject.

A policy may offer several alternatives that vary from weak to strong set of requirements. An adversary may interfere and remove all the alternatives except the weakest one (say no security requirements). Or, an adversary may interfere and discard this policy and insert a weaker policy previously issued by the same provider. Policy authors or providers can mitigate these threats by sun-setting older or weaker policy alternatives. Requestors can mitigate these threats by discarding policies unless they are signed by the provider.

Malicious providers may include policy assertions in its policy whose behavior cannot be verified by examining the wire message from the provider to requestor. In general, requestors have no guarantee that a provider will behave as described in the provider’s policy expression. The provider may not and perform a malicious activity. For example, say the policy assertion is privacy notice information and the provider violates the semantics by disclosing private information. Requestors can mitigate this threat by discarding policy alternatives which include assertions whose behavior cannot be verified by examining the wire message from the provider to requestor. Assertion authors can mitigate this threat by not designing assertions whose behavior cannot be verified using wire messages.

Malicious providers may provide a policy expression with a large number of alternatives, a large number of assertions in alternatives, deeply nested policy expressions or chains of PolicyReference elements that expand exponentially (see the chained sample below; this is similar to the well-known DTD entity expansion attack). Policy implementers need to anticipate these rogue providers and use a configurable bound with defaults on number of policy alternatives, number of assertions in an alternative, depth of nested policy expressions, etc.

Malicious providers may provide a policy expression that includes multiple PolicyReference elements that use a large number of different internet addresses. These may require the consumers to establish a large number of TCP connections. Policy implementers need to anticipate such rogue providers and use a configurable bound with defaults on number of PolicyReference elements per policy expression.

Implementers of Web Services policy language should be careful to protect their software against general XML threats like deeply nested XML or XML that contains malicious content.